Installation Wizard - D-Link Securicam Network DCS-2000 Manual

Installation Wizard

After you have successfully completed the hardware installation of the DCS-
2000 Internet Camera, it is necessary to install software to configure and operate
the camera. The first step is to install the Installation Wizard from the CD.
Installation Wizard will allow you to configure the Internet Camera to your
network.
After the Installation Wizard software program is completed, you will have an
operating and controllable Internet Camera. From your Internet Explorer Web
browser you will be able to access the video and sound from the Internet camera.
The camera has a built-in Web server. This Web server will allow the camera to
access the Internet without being attached to a computer and permits users to
view the video and audio remotely.
After running the Installation Wizard, you will be able to operate the DCS-2000
and view the camera remotely through Internet Explorer 6.x or above.
However it is necessary to install the IP surveillance software from the enclosed
CD to create a truly powerful monitoring and surveillance system. The following
section will show in detail the installation of the Installation Wizard and the IP
surveillance software.
Installing the Installation Wizard program
Insert the CD that is included with the DCS-2000 Internet Camera. The
DCS-2000 installation menu will start up automatically from the CD. If the CD
does not start up automatically (the Windows operating system can turn this
function off, for example), go to Start > Run > Type D:\Autorun (if D:\ is your cd-
rom drive) to access the installation menu shown below:
Click Install Software
9