D-Link DCS-2530L User Manual

D-Link DCS-2530L User Manual

Full hd 180-degree wi-fi network camera
Hide thumbs Also See for DCS-2530L:

Advertisement

Version 1.02 | 10/04/2016

User Manual

Full HD 180-Degree Wi-Fi Network Camera
DCS-2530L

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-2530L

  • Page 1: User Manual

    Version 1.02 | 10/04/2016 User Manual Full HD 180-Degree Wi-Fi Network Camera DCS-2530L...
  • Page 2 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change.
  • Page 3: Table Of Contents

    Accessing the Web Configuration Utility ......17 Technical Specifications ..........54 Live Video ..................18 Setup ....................20 Regulatory Information ..........56 Setup Wizard ................20 Network Setup ..............25 Wireless Setup ..............28 Dynamic DNS ...............29 Image Setup .................30 Audio and Video ..............32 Motion Detection ...............33 D-Link DCS-2530L User Manual...
  • Page 4: Product Overview

    Section 1: Product Overview Product Overview Package Contents • DCS-2530L Full HD 180-Degree Wi-Fi Network Camera • Power Adapter • Mounting Kit • Quick Installation Guide • Quick Install Card Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product.
  • Page 5: Introduction

    Features 180° Wide Angle Lens The DCS-2530L provides whole-room coverage with a 180° wide angle lens, eliminating the need for multiple cameras to cover a single room. Built-in dewarping technology automatically corrects the image for you. 1080p Full HD Video The 1080p Full HD sensor provides crisp detail and clarity for high-quality snapshots and video.
  • Page 6: Hardware Overview

    Section 1: Product Overview Hardware Overview Front View Microphone Light Sensor IR LEDs (behind cover) Camera Lens Signal Locator LED Solid Green: Best wireless signal Solid Orange: Good wireless signal Blinking Orange: Poor wireless signal Camera Stand D-Link DCS-2530L User Manual...
  • Page 7: Rear View

    Section 1: Product Overview Rear View microSD Slot WPS Button Reset Button Power/Status LED MicroUSB Connector Solid Green: Successfully connected (for power) Blinking Green: WPS process in progress Solid Red: Camera is booting, or firmware upgrade is in progress D-Link DCS-2530L User Manual...
  • Page 8: Installation

    Lite Mobile App: You can use the mydlink Lite mobile app to guide you through setup and initial configuration of your camera. Refer to "Mobile App Setup" on page 10. Zero Configuration Setup: If you have a mydlink-enabled router (D-Link Cloud Router), this is the easiest way to set up your camera. Refer to "Zero Configuration Setup" on page 11.
  • Page 9: Wireless Installation Considerations

    Wireless Installation Considerations The DCS-2530L connects to your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
  • Page 10: Mobile App Setup

    When you are asked to scan a QR code, use the code on the Quick Install Card in your package, or on the label attached to your device. Congratulations, your DCS-2530L is now ready to use! Be sure to check the mydlink.com website periodically for the latest firmware updates to keep your product secure and up to date with the latest features.
  • Page 11: Zero Configuration Setup

    Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-2530L and add the camera to your mydlink account. After the short time it takes to do this you can remotely access your camera from the website (http://www.mydlink.com) to manage and monitor your DCS-2530L.
  • Page 12 Click the notification to continue. DCS-2530L A summary and confirmation notification will appear with the automatically configured details. Make a note of the details and click Yes to add the camera to your account. DCS-2530L D-Link DCS-2530L User Manual...
  • Page 13 Note: If you see a white haze when viewing in night vision mode, the night vision light on the camera may be reflecting off a nearby surface. Try repositioning and aiming the camera. D-Link DCS-2530L User Manual...
  • Page 14: Mounting The Camera

    Depending on the material of the wall or ceiling, use proper tools to drill holes 25 mm deep with a 6 mm drill bit where you marked. If the wall is made out of concrete, drill the holes first, then insert the plastic anchors to support the screws. D-Link DCS-2530L User Manual...
  • Page 15 Step 6 Adjust the angle and rotation of the camera as desired. You can also rotate the camera on the baseplate about 45° to the right or left. D-Link DCS-2530L User Manual...
  • Page 16: Mydlink

    For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to find the latest instruction guide for your camera’s mydlink features. D-Link DCS-2530L User Manual...
  • Page 17: Configuration

    Web configuration utility is designed to allow you to easily access and configure your DCS-2530L. At the end of the wizard, click Go To Camera, or enter the IP address of your camera . To log in, use the User name admin and the into a web browser, such as Internet Explorer ®...
  • Page 18: Live Video

    Please make sure that you have the latest version of Java installed on your computer to ensure proper operation when viewing the video in Java mode. The Java application can be downloaded free from Sun’s web site (http://www.java.com). D-Link DCS-2530L User Manual...
  • Page 19 Storage folder button. Storage folder button Sets the storage folder for snapshots and video recordings. Listen button Sends the audio received from the camera’s microphone through to the PC’s speakers. D-Link DCS-2530L User Manual...
  • Page 20: Setup

    "Motion Detection Setup Wizard" on page 23 for more details. Manual Motion If you would rather manually set up the camera’s motion detection Detection Setup: features, you can refer to "Motion Detection" on page 33 which provides more details on the information required. D-Link DCS-2530L User Manual...
  • Page 21: Internet Connection Setup Wizard

    Section 3: Configuration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the Internet. Click Next to continue. Select how the camera will connect to the Internet.
  • Page 22 If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera. Click Apply to save your settings. D-Link DCS-2530L User Manual...
  • Page 23: Motion Detection Setup Wizard

    Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the days and hours to enable motion detection. You may also choose to always record whenever motion is detected. D-Link DCS-2530L User Manual...
  • Page 24 Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-2530L User Manual...
  • Page 25: Network Setup

    Invalid gateway settings may cause transmissions to a different subnet to fail. Primary DNS: Enter the primary domain name server that translates names to IP addresses. Secondary DNS: Enter the secondary domain name server used to back up the Primary DNS. D-Link DCS-2530L User Manual...
  • Page 26 Enable CoS: Enabling CoS allows you to specify the Class of Service for different types of traffic so you can prioritize their transmission on your network. CoS helps provide prioritization for Layer 2 traffic. D-Link DCS-2530L User Manual...
  • Page 27 Static IP address and enter the information provided by your ISP or network administrator. Enable Multicast for The DCS-2530L allows you to multicast each of the available streams stream: via a group address and lets you specify the TTL value for each stream.
  • Page 28: Wireless Setup

    Select the same encryption method that is being used by your wireless device/router. Encryption: If you chose WPA-PSK or WPA2-PSK, choose whether to use TKIP or AES. Key: Enter the key(password) for your wireless network. Click the Save Settings button to save your changes. D-Link DCS-2530L User Manual...
  • Page 29: Dynamic Dns

    Enter the password used to connect to your DDNS account. Enter it again in the Verify Password field. Timeout: Enter the DNS timeout values you wish to use. Status: This indicates the connection status, which is automatically determined by the system. D-Link DCS-2530L User Manual...
  • Page 30: Image Setup

    You can also create 3 different custom exposure modes that let you set the minimum and maximum shutter speeds. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. D-Link DCS-2530L User Manual...
  • Page 31 This setting controls the amount of coloration, from grayscale to fully saturated. Sharpness: Specify how much sharpening to apply to the image. Reset Default: Click this button to reset the image settings to the factory defaults. D-Link DCS-2530L User Manual...
  • Page 32: Audio And Video

    Checking this will mute audio picked up by a microphone connected to the audio in jack. Audio in gain level: Specify how much gain to add to audio picked up by a microphone connected to the audio in jack. D-Link DCS-2530L User Manual...
  • Page 33: Motion Detection

    Right click on the camera image to bring up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-2530L User Manual...
  • Page 34: Sound Detection

    Specify the volume level that a sound must exceed in order to trigger the sound detection feature. The lower the number, the more sensitive the camera will be to sound. Click Save Settings to save your changes. D-Link DCS-2530L User Manual...
  • Page 35: Time And Date

    Enable this feature to obtain time automatically from an NTP server. NTP Server: NTP Server: Network Time Protocol (NTP) synchronizes the DCS-2530L with an Internet time server. Choose the one that is closest to your location. Set Date and Time This option allows you to set the time and date manually.
  • Page 36: Event Setup

    Event Setup The DCS-2530L has a versatile Event system that lets you configure the camera to perform certain actions when an event occurs. For example, when motion is detected, you can have snapshots sent to an e-mail address. You can also configure the camera to take regular video recordings according to a schedule you define.
  • Page 37: Add Server

    E-mail: If you want to use an e-mail address for your server, select this and enter the settings for your target e-mail account. SD Card: Select this to use an inserted microSD card as your server. D-Link DCS-2530L User Manual...
  • Page 38: Add Media

    9 images are generated after a trigger is activated. 1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. The moment the trigger is activated. D-Link DCS-2530L User Manual...
  • Page 39 This is the prefix that will be added to the filename of saved video clips. System log: Select this option to set the media type to system logs. This will send the system log, but will not record any snapshots or video. D-Link DCS-2530L User Manual...
  • Page 40: Add Event

    Event Schedule: Specify when you want to monitor for this event. Select which days to monitor for this event, then select Always or enter the time interval to monitor for the specified event. D-Link DCS-2530L User Manual...
  • Page 41 Section 3: Configuration Action: If you have created Server and Media entries, you will see them appear here. Select which Server you want to send to and which Media you want the camera to send. D-Link DCS-2530L User Manual...
  • Page 42: Add Recording

    Before you set up this option, please make sure your storage drive has enough free space. Also, it is recommended that you do not save other files in the same folder as your recording files. D-Link DCS-2530L User Manual...
  • Page 43 Time of each file for If this is selected, files will be separated based on the maximum length recording: you specify. File Name Prefix: The prefix name will be added to the file name of the recording file(s). D-Link DCS-2530L User Manual...
  • Page 44: Sd Card

    Click this icon to automatically format the microSD card and create the Video and Picture folders. Deleting Files and To delete files and folders, click on the checkbox next to the files or folders you want to delete, then click the OK button. Folders: D-Link DCS-2530L User Manual...
  • Page 45: Advanced

    The IR light will always be on. Sync with ICR: The IR light will turn on when the ICR filter is disabled (night mode). Schedule: The IR light will turn on or off according to the schedule that you specify below. D-Link DCS-2530L User Manual...
  • Page 46: Https

    ƒ Create a certificate request and install Status: Displays the status of the certificate. Note: The certificate cannot be removed while HTTPS is still enabled. To remove the certificate, you must first uncheck Enable HTTPS secure connection. D-Link DCS-2530L User Manual...
  • Page 47: Access List

    Section 3: Configuration Access List Here you can set access permissions for users to view your DCS-2530L. Allow list: The list of IP addresses that have access rights to the camera. Note: When adding entries to the Allow list, make sure the first entry includes the IP address of the computer or device you are using to access the camera.
  • Page 48: Maintenance

    Label: Enter a label for the camera, which will be shown on the OSD when it is enabled. LED: You may specify whether or not to illuminate the status LED on the camera. D-Link DCS-2530L User Manual...
  • Page 49: System

    This will restart your camera. Enable Schedule If you want your camera to reboot on a regular schedule, check the Reboot: Enable Schedule Reboot checkbox, then select the days and time you want the camera to reboot on. D-Link DCS-2530L User Manual...
  • Page 50: Firmware Upgrade

    Section 3: Configuration Firmware Upgrade The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-2530L, please download and save the latest firmware version from the D-Link Support Page to your local hard drive.
  • Page 51: Status

    Section 3: Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-2530L User Manual...
  • Page 52: Log

    Section 3: Configuration This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-2530L User Manual...
  • Page 53: Help

    Section 3: Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-2530L User Manual...
  • Page 54: Technical Specifications

    • Browser: Internet Explorer 8, Firefox 12, Chrome 20 , or Safari 6 or higher Event Management • Motion detection • Event notification and uploading of snapshots/video clips via e-mail • Sound level detection • Scheduled recording D-Link DCS-2530L User Manual...
  • Page 55 Maximum wireless signal rate derived from IEEE standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. Chrome for configuration only. D-Link DCS-2530L User Manual...
  • Page 56: Regulatory Information

    Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DCS-2530L User Manual...
  • Page 57 Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DCS-2530L User Manual...
  • Page 58 Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link DCS-2530L User Manual...
  • Page 59 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
  • Page 60 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
  • Page 61 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
  • Page 62 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DCS-2530L User Manual...
  • Page 63 5 Ghz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DCS-2530L User Manual...
  • Page 64 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DCS-2530L User Manual...
  • Page 65 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DCS-2530L User Manual...
  • Page 66 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DCS-2530L User Manual...
  • Page 67 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DCS-2530L User Manual...
  • Page 68 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
  • Page 69 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
  • Page 70 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
  • Page 71 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
  • Page 72 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
  • Page 73 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
  • Page 74 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

Table of Contents