D-Link Securicam Network DCS-2000 Manual page 55

Using the DCS-2000 with an Internet browser
(continued)
Configuration > Tools > Default
Click Apply to make
changes effective
Click on the Default button to access the option to restore to factory default
settings.
Click Default
Click Apply on this screen to restore factory default settings. This means any
changes made will be lost and the system will be reset to the initial status when
shipped from the factory. After confirmation, the system will restart and require
the Installation Wizard software program to locate the IP address of the DCS-
2000.
Configuration > Status > Device Info
Click on the Status tab to access Device Info and a Log of DCS-2000 system
activity. The Device Info is the default screen when you click on the Status
tab.
55