D-Link DCS-5300 Quick Installation Manual

D-Link DCS-5300 Quick Installation Manual

Home security internet camera with pan/tilt
Hide thumbs Also See for DCS-5300:

Advertisement

This product can be set up
using Internet Explorer 5.x
or later

Before You Begin

You must have at least the following:
• Windows XP/2000/ME/98SE
• Ethernet Adapter
• CD-ROM Drive

Check Your Package Contents

These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice. DCS-5300.06282004
DCS-5300 Internet Camera and 1 remote Controller
Installation CD (containing Drivers, Software, Quick
Installation Guide and Manual)
A/V Cable
Category 5 Ethernet Cable
Stand & Mounting bracket
12V AC Power Adapter
DCS-5300
Home Security Internet
Camera with Pan/Tilt
Using a power supply
with a different voltage
rating will damage this
product and void the warranty.

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-5300

  • Page 1: Before You Begin

    Category 5 Ethernet Cable Stand & Mounting bracket 12V AC Power Adapter ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DCS-5300.06282004 DCS-5300...
  • Page 2: System Requirements

    System Requirements • Internet Explorer 5.x or above • CPU: Pentium III, 800 MHz or above (Required for use with IP surveillance software) • Memory Size: 128 MB (256 MB recommended) • VGA card resolution: 800x600 or above Note: If using multiple cameras for viewing/recording, the minimum requirements are a Pentium 4 (2GHz or above) CPU with 512MB memory and a 32MB video card.
  • Page 3 Hardware Installation (continued) Attach the A/V cable to the A/V out connector if you wish to connect the DCS-5300 to your TV set. Attach the red RCA connector to the “video” connector on your TV. Attach the black RCA cable to the “audio”...
  • Page 4: Configuring Camera With Ip Installer

    Configuring your camera with IP Installer Insert the DCS-5300 CD into the CD-ROM drive. Click on IP Installer This is the first screen that will appear.
  • Page 5 LED starts to flash the second time. The IP Installer will now show the MAC address of the DCS-5300 and an IP Address (which may or may not be correct depending on what you have your DCS-5300 connected to.) If you...
  • Page 6: Viewing Your Internet Camera

    After you click on the Link button, IP Installer will automatically open your Internet browser to the IP Address of the DCS-5300, in this example it is: http://192.168.0.146.Your DCS-5300 may have a different IP Address. At this point, it is highly recommended that you put in a password for security purposes.
  • Page 7 (Continued) Click on Tools and you will be in the Admin page, this is where you will be able to put in your password and add additional accounts to the DCS-5300 Enter the adminstrative password. Click Save then “X” at top right hand corner of your Browser to close the page.
  • Page 8 You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone.

This manual is also suitable for:

Dcs-2000

Table of Contents