Replacing The Lens - D-Link SECURICAM Network DCS-2100+ Manual

Replacing the Lens

Since the DCS-2100+ Internet Camera is designed with a CS-mount, the lens
equipped with the Internet Camera can be replaced with any standard C or CS-
mount lens commonly used within the surveillance industry.
Follow the instructions below to replace the supplied lens with any C or CS-
mount lens.
1. Unscrew the Internet Camera lens
2. When using a C-mount lens, attach the new lens to a CS to C-mount
adapter.
3. Screw the new lens onto the Internet Camera.
4. Refer to Adjusting the Internet Camera Focus on the previous page.
5. Refresh the Web browser and monitor the results from the Internet Camera.
The Internet Camera is designed for indoor usage and if your appli-
cation requires prolonged exposure to sunlight, a sun visor is rec-
ommended to protect the Internet Camera.
Warning!
Direct exposure to sunlight may cause permanent
damage to the CMOS sensor. Therefore do not ex-
pose the Internet Camera's lens directly to sunlight.
When operation is required in glaring light environment,
it is recommended to use an iris lens.
134