Replacing The Lens - D-Link DCS-1000 Manual

Replacing the Lens

Since the DCS-1000 is designed with a CS- mount, the lens equipped with the
DCS-1000 can be replaced with any standard C or CS lens commonly used
within the surveillance industry.
Follow the instructions below to replace the supplied lens with any C or CS
type lens.
1. Unscrew the DCS-1000 lens
2. C-lens only, attach the new lens to a CS-C adapter
3. Screw the new lens onto the DCS-1000. If appropriate, adjust the iris
according to the prevailing light conditions.
4. Refer to Adjusting the DCS-1000 Focus on the previous page.
5. Refresh the web browser and monitor the results from the DCS-1000.
79