D-Link Securicam Network DCS-2000 Manual page 43

Using the DCS-2000 with an Internet browser
(continued)
Invalid settings may cause the DCS-2000 to not respond. Change the
configurations only if necessary. Consult with your network administrator
or your Internet Service Provider (ISP) if you do not have the necessary
information. If you cannot connect to the camera, refer to page 125 for
camera reset and restore factory settings procedures.
Configuration > Advanced > Video
Click the video button from the Configuration screen to access video settings
that affect how the video image appears.
Click Video
Text on video -
Text will be displayed in the black bar above the video
window with the timestamp. The timestamp is
captured from the date and time of the DCS-2000
and is maintained by a built-in real-time clock.
43