Mounting Procedure - Omnik Omniksol-1k-TL-M User Manual

5.4

Mounting Procedure

5.4.1 Mounting with bracket
1. Mark 2 positions of the drill holes on the wall according to
carton box.
2. First, according to the marks, drill 2 holes in the wall. Then, place two expansion tubes in
the holes using a rubber hammer. Next, make 2 screws through the mounting holes in the
bracket, then tighten the screws into the expansion tubes. so far, the wall mounting bracket
is fixed already.
20
the wall mounting bracket
in the