Antifouling Paint - Mercury MerCruiser Diesel Inboard 2.8L Operation & Maintenance Manual

Section 4 - Maintenance
2. Install the anode assembly and washer into the aftercooler end cover. Tighten securely.
b
3. Install the anode assembly and washer into the aft end of the fluid cooler. Tighten securely.
a
4. Unplug and connect the seawater inlet hose, or open the seacock if equipped.
Without sufficient cooling water, the engine, the water pump, and other components will overheat and suffer damage. Provide
a sufficient supply of water to the water inlets during operation.
5. Ensure that the seawater pickup pump is supplied cooling water.
6. Start the engine and check for leaks

Antifouling Paint

IMPORTANT: Corrosion damage that results from the improper application of antifouling paint is not covered by the limited
warranty.
In some areas it may be advisable to paint the bottom of the boat to help prevent marine growth. Contact a Mercury Diesel
authorized repair facility for recommendations for your boat.
Page 64
a - Aftercooler end cover
b - Anode assembly
a
23266
b
NOTICE
Typical engine
a - Anode assembly
b - Fluid cooler
23710
90-8M0133679 JUNE 2017
eng