Antifouling Paint; Lubrication; Throttle Cable - Mercury 92‑813054A2 Manual

Section 5 - Maintenance
2. Install the anode assembly and washer into the aftercooler end cover. Tighten securely.
3. Unplug and connect the seawater inlet hose, or open the seacock if equipped.
Without sufficient cooling water, the engine, the water pump, and other components will overheat and suffer damage. Provide
a sufficient supply of water to the water inlets during operation.
4. Ensure that both the sterndrive and engine seawater pickup pumps are supplied cooling water.
5. Start the engine and check for leaks

Antifouling Paint

IMPORTANT: Corrosion damage that results from the improper application of anti‑fouling paint is not covered by the limited
warranty.
In some areas it may be advisable to paint the bottom of the boat to help prevent marine growth. Contact a Mercury Diesel
authorized repair facility for recommendations for your boat.

Lubrication

Throttle Cable

1. Lubricate the pivot points and guide contact surfaces.
Tube Ref No.
SAE Engine Oil 30W
80
Page 70
a a
b
Description
Throttle cable pivot points and guide contact surfaces
a - Sacrificial anode
25583
NOTICE
a -
b -
23643
Where Used
Pivot points
Guide contact surfaces
Part No.
Obtain Locally
90-8M0069748 APRIL 2012
eng