ZF Marine Transmissions
On the ZF Marine 63A 8° down‑angle and 63IV V‑drive transmissions, the transmission identification plate indicates gear ratio,
serial number, and model.
Technodrive Transmissions
On the Technodrive TM 485‑A, the transmission identification plate indicates gear ratio, serial number, and model.
Features and Controls
Audio Warning System
Your power package is equipped with an audio warning system. The audio warning system monitors critical components and
informs the operator when a malfunction has occurred. The warning system is not capable of protecting the power package
from damage caused by a malfunction.
When an electronic control system detects a recordable malfunction, the audio warning system will sound to alert the operator.
The duration and type of horn sound depend upon the nature of the fault condition. In the case of any horn sounding, the user
should refer to the helm displays to understand the specific situation.
For the operator to view the fault code of the malfunction indicated and any recommended actions, the power package must be
equipped with a gauge package that supports the warning system and can display fault codes.
The following instruments have screens that display fault codes:
•
VesselView
•
SmartCraft System Tachometer
•
SmartCraft System Speedometer
90-8M0133679
JUNE 2017
eng
Typical ZF Marine down-angle transmission show (V-drive similar)
a
a -
Transmission identification plate
7449
Typical Technodrive transmission shown
Section 1 - Getting to Know Your Power Package
24657
Page 3