Coolant Temperature Gauge; Hourmeter/Tachometer - Kubota L2501 Operator's Manual

Hide thumbs Also See for L2501:
Table of Contents

Advertisement

BCoolant Temperature Gauge
To avoid personal injury or death:
A Do not remove radiator cap until coolant
temperature is well below its boiling point.
Then loosen cap slightly to the stop to relieve
any pressure before removing cap completely.
1. With the key switch at "ON", this gauge indicates the
temperature of the coolant. "C" for "cold" and "H" for
"hot".
2. If the indicator reaches the red zone position, engine
coolant is overheated. Check the tractor by referring to
"TROUBLESHOOTING" section.

(1) Coolant temperature gauge

(A) "RED ZONE"
OPERATING THE TRACTOR
BHourmeter/Tachometer
This meter gives readings for engine speed, PTO shaft
speed and the hours the tractor has been operated.
1. The tachometer indicates the engine speed and the
540 PTO shaft speed location on the dial.
2. The hourmeter indicates in 5 digits the hours the
tractor has been used; the last digit indicates 1/10 of
an hour.
(1) Engine revolution
(2) Hours used
(A) PTO : 540 rpm
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents