Main Gear Shift Lever & Range Gear Shift Lever; Front Wheel Drive Lever - Kubota L3200 Operator's Manual

20 OPERATING THE TRACTOR
6. Selecting the Travel Speed.
(1) Main gear shift lever
(2) Range gear shift lever
(Shuttle shift lever)

(3) Front wheel drive lever

BMain Gear Shift Lever & Range Gear Shift
Lever
The main gear shift lever pattern is in the form of a "H".
The range gear shift lever moves in the form of a " " in 3
stages, "HIGH", "LOW" and "REVERSE".
By combination and use of the main gear shift lever and
the range gear shift lever, eight forward speeds and four
reverse speeds are obtained.
A To change speeds, press the clutch pedal completely
down and stop the tractor before attempting to
proceed with speed change.
(L) "LOW"
(N) "NEUTRAL"
(H) "HIGH"
(R) "REVERSE"
BFront Wheel Drive Lever
To avoid personal injury:
A Do not engage the front wheel drive when
traveling at road speed.
A When driving on icy, wet, or loose surfaces,
make sure the tractor is correctly ballasted to
avoid skidding and loss of steering control.
Operate at reduced speed and engage front
wheel drive.
A An accident may occur if the tractor is
suddenly braked, such as by heavy towed
loads shifting forward or loss of control.
A The braking characteristics
between two and four wheel drive. Be aware of
the difference and use carefully.
are different