ACME Xperior XP-16R BEAM II User Manual page 14

To select Temperature, press the ENTER button to confirm, temperature of the fixture will
show on the display, press the MENU button back to exit.
Firmware Version
To select Firmware Version, press the ENTER button to confirm, firmware version will show on
the display, press the MENU button back to exit.
Reset Functions
Enter menu mode, select Reset Function, press the ENTER button to confirm, use the
UP/DOWN button to select Pan/Tilt, Efffect or All.
Pan/Tilt —Reset Pan/Tilt
To select Pan/Tilt, press the ENTER button to confirm, use the UP/DOWN button to select Yes
(the unit will run built-in program to reset pan and tilt to their home positions) or No, press
the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Effect —Reset Effect
To select Effect, press the ENTER button to confirm, use the UP/DOWN button to select Yes
(the unit will run built-in program to reset shutter, color, gobo...... to their home positions) or
No, press the ENTER button to store. Press the MENU button back to the last menu or let the
unit idle one minute to exit menu mode.
All — Reset All
To select All, press the ENTER button to confirm, use the UP/DOWN button to select Yes (the
unit will run built-in program to reset all motors to their home positions) or No, press ENTER
button to store. Press the MENU button to exit.
Special Functions
Enter menu mode, select Special Functions, press the ENTER button to confirm, and select
Factory Settings.
14