ACME Xperior XP-16R BEAM II User Manual page 13

button to select Auto Test or Manual Test.
Auto Test
To select Auto Test, press the ENTER button to confirm, the unit will run built-in programs to
automatically test pan, tilt, shutter, color, gobo, gobo rotation, prism, prism rotation, focus,
dimmer and lamp on/off. Press the MENU button back to the last menu or exit menu mode
after auto test.
Manual Test
To select Manual Test, press the ENTER button to confirm, the present channel will show on
the display, use the UP/DOWN button to select channel, press the ENTER button to confirm,
then use the UP/DOWN button to adjust the value, press the ENTER button to store, the
fixture will run as the channel value indicates. Press the MENU button back to the last menu or
exit menu mode idling one minute.
(All channels value will become 0 after exiting Manual Test menu)
Fixture Information
Enter menu mode, select Fixture Information, press the ENTER button to confirm, use the
UP/DOWN button to select Fixture Use Hour, Lamp Use Hour,Temperature or Firmware
Version.
Fixture Use Hour
Select Fixture Use Hour, press the ENTER button to confirm, fixture use time will show on the
display, press the MENU button to exit.
Lamp Use Hour
To select Lamp Use Hour, press the ENTER button to confirm, lamp on time will show on the
display, press the ENTER button to confirm, use the UP/DOWN button to select Exit or Reset
Time, press the ENTER button to confirm. Press the MENU button back to the last menu or
exit menu mode idling one minute.
Temperature
13