2.10
User Box Function
<From Web Connection>
0
For the procedure to access the Admin Mode, see page 2-2.
0
Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start Web Connection and access the Admin Mode.
2
Click the [Fax Settings] tab.
3
Click [Function Setting] - [RX Data Operation Settings] from the menu.
4
Select [Memory RX Setting] and click [OK].
5
Select the check box under [Password is changed] and set the Memory RX User Box Password that
should consist of eight characters.
% Make sure that the Memory RX User Box Password consists of eight characters.
6
Click [OK].
bizhub 367/287/227
2
2-53