Konica Minolta BIZHUB 367 User Manual page 54

2.8 User Setting Function
It should be noted that this function is valid only through operation from the control panel of the ma-
chine. In operation from Web Connection or application software, if Account Name is not regis-
tered, you cannot log onto the mode.
% [Account Name] does not appear, if Account Track has not been set for the authentication method
or any option other than [Synchronize] has been selected for [Synchronize User Authentication &
Account Track].
8
Select the desired account.
9
Touch [OK].
10
Make the necessary settings.
% If the User Name is yet to be entered, [OK] cannot be touched. Be sure to enter the User Name.
% A User Name that already exists cannot be redundantly registered.
% To suspend temporarily a registered user from using the machine, touch [Pause] and select [Stop
Job]. If the account to which the user belongs is temporarily suspended from using the machine,
however, selecting [Continue Job] does not allow the user to use the machine.
% To restrict the functions the user can use, use [Function Permission] and set Allow or Restrict for
each function. Setting [All Users] applies the same [Function Permission] to all users.
11
Touch [OK].
bizhub 367/287/227
2
2-33