Change Password Function; Performing Change Password - Konica Minolta BIZHUB 367 User Manual

3.2

Change Password Function

3.2 Change Password Function
When [ON (MFP)] is set for Authentication Method of User Authentication, the machine permits each of all
users who have been authenticated through User Authentication to change his or her User Password.
The User Password entered is displayed as "*" or "-."

Performing Change Password

<From the Control Panel>
0 For the logon procedure, see page 3-2.
0 Do not leave the machine while you are in the user operation mode. If it is absolutely necessary to leave
the machine, be sure first to log off from the user operation mode.
1
Log on to the user operation mode through User Authentication from the control panel.
2
Touch [Utility].
3
Touch [User Settings].
4
Touch [Change Password].
5
Enter the currently registered User Password from the keyboard.
bizhub 367/287/227
3
3-9