Introduction; Compliance With The Iso15408 Standard; Operating Precautions - Konica Minolta BIZHUB 367 User Manual

1.1

Introduction

1 Security
1.1 Introduction
Thank you for purchasing our product.
This User's Guide contains the operating procedures and precautions to be used when using the security
functions offered by the bizhub 367/287/227 machine. To ensure the best possible performance and effective
use of the machine, read this manual thoroughly before using the security functions. The administrator of the
machine should keep this manual for ready reference. The manual should be of great help in finding solutions
to operating problems and questions.
This User's Guide (version 1.02) covers the following.
Model name
Version
For any query, request, or opinion concerning the machine, please contact your dealer from which you pur-
chased your machine or Service Representative.
Any notice concerning this machine will be given in writing by the dealer from which you purchased your ma-
chine or Service Representative.

Compliance with the ISO15408 Standard

When the Enhanced Security Mode on this machine is set to [ON], more enhanced security functions are
available.
This machine offers the security functions that comply with the ISO/IEC15408 (level: EAL2) and U.S. Govern-
ment Approved Protection Profile - U.S. Government Protection Profile for Hardcopy Devices Version 1.0
(IEEE Std 2600.2

Operating Precautions

The machine gives an alarm message or an alarm sound (peep) when a wrong operation is performed or a
wrong entry is made during operation of the machine. (No "peep" alarm sound is issued if a specific sound
setting in Sound Setting of Accessibility Setting is set to [OFF].) If the alarm message or alarm sound is given,
perform the correct operation or make the correct entry according to the instructions given by the message
or other means.
The administrator of the machine should exit from the current mode to return to the basic screen whenever
the access to that mode is completed or if he or she leaves the machine with the mode screen left displayed.
The administrator of the machine should make sure that each individual general user exits from the current
mode to return to the basic screen whenever the access to that mode is completed or if the user leaves the
machine with the mode screen left displayed.
If an error message appears during operation of the machine, perform steps as instructed by the message.
For details of the error messages, refer to the User's Guide furnished with the machine. If the error cannot be
remedied, contact your service representative.
The Web Connection functions can be used only if the setting is made to accept "Cookie."
bizhub 367/287/227
bizhub 367/bizhub 287/bizhub 227/bizhub 136DN/bizhub 128DN/bizhub
122DN/ineo 367/ineo 287/ineo 227/Sindoh N502/Sindoh N501/Sindoh
N500/Sindoh MF3091/Sindoh MF2101/Sindoh MF2041/Sindoh N512/Sindoh
N511/Sindoh N510/Sindoh N517/Sindoh N516/Sindoh N515
G00-27
TM
-2009).
1
1-2