Multi-Wan Configuration - D-Link DWR-961 User Manual

Section 4 - Configuration
After selecting a secondary WAN and clicking apply, you will be directed to a setup screen for the relevant connection type.
4G LTE failover
Username: Fill in only if requested by your ISP (optional).
Password: Fill in only if requested by you ISP (optional).
Verify Password: Retype password if required above.
Dialed Number: If your ISP provides you with a dial-in number, enter it here. Empty
by default.
Select PAP, CHAP or Auto if requested by your carrier. The default
Authentication:
authentication method is Auto.
Enter the APN (Access Point Name) for your 4G connection.
APN:
Reset: Press Reset to restore your APN setting to factory default. This
button leaves all other settings unchanged, including those on
this page.
Pin Code:
If your SIM/UICC card has a PIN, enter it here (optional).
Radio
Frequency:
Turns the cellular radio on or off. This setting is intended to disable
the cellular radio for areas where radio transmissions may be
restricted.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-961 User Manual

Multi-WAN Configuration

24