D-Link DWR-961 User Manual page 23

Section 4 - Configuration
IP Address: Enter the IP address assigned to your network connection.
Subnet Mask: Enter the subnet mark.
Default Gateway: Enter the default gateway.
Primary DNS
Server: Enter the primary DNS server.
Secondary DNS
Server: Enter the secondary DNS server.
MTU: You may need to change the Maximum Transmission Unit (MTU)
for optimal performance. The default value is 0.
MAC Address: The default MAC address is set to the WAN port's physical interface
MAC address. Changing it is not recommended unless required
to do so by your ISP. You can use the Clone button to replace the
WAN port's MAC address with the MAC address of your PC.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-961 User Manual
Static IP Address Failover
25