D-Link DWR-961 User Manual page 16

Section 4 - Configuration
Bridge Ethernet
Activate this feature to use the Ethernet WAN port as an additional
Ports:
LAN port.
NAT disable:
Enabling this option will disable the NAT function of the DWR-961,
allowing it to act as a link for your devices to your Internet
connection, but without routing functions.
Transparent
Enabling the Transparent Bridge function disables the routing/
Bridge:
NAT functions and passes the public WAN IP address given by your
service provider directly through to the local client or PC. This can
only be used if a single IP address has been assigned by your ISP. If
transparent bridge is enabled, the above NAT Disable option will
not be available
Radio
Frequency:
. Turns the cellular radio on or off. This setting is intended to
disable the cellular radio for areas where radio transmissions may
be restricted.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-961 User Manual 18