D-Link DWR-961 User Manual page 15

Section 4 - Configuration
Prefer Service Choose whether the DWR-961 should only use 4G networks,
Type: networks, or use Auto Mode to automatically select a network.
Username: Fill in only if requested by carrier ISP (optional).
Password: Fill in only if requested by carrier (optional).
Verify Password: Re-type your password in this field (optional).
Dialed Number: If your carrier provides a dial-in number or code, enter it here.
Empty by default.
Authentication: Select PAP, CHAP, or Auto detection. The default authentication
method is Auto.
APN: Enter the APN information (optional).
Pin Code: If your SIM card has a PIN code, enter it here
Select Auto, Manual, or Connect-on-deman to determine
Reconnect
Mode: whether the router should reconnect to your 4G network
automatically or manually.
Set the maximum time your connection can be idle before
disconnecting. Set it to 0 or choose Auto in Reconnect Mode to
Maximum Idle
Time: disable this feature.
Roaming: Enabling this option will allow you to connect when roaming away
from your carrier's home network.
Note: Roaming connections may incur additional fees from your
service provider.
D-Link DWR-961 User Manual
4G LTE
17