D-Link DWR-961 User Manual page 35

Section 4 - Configuration
This page contains settings which can negatively affect the performance of your router if configured improperly. Do not change these settings
unless you are already familiar with them or have been instructed to make the change by one of our support personnel.
Beacon Interval: Specify a value for the beacon interval. Beacons are packets sent
by an access point to synchronize a wireless network. 100 is the
default setting and is recommended.
Transmit Power: Set the transmit power of the antennas.
RTS Threshold: This value should remain at its default setting of 2347. If
inconsistent data flow is a problem, only a minor modification
should be made.
Fragmentation: The fragmentation threshold, which is specified in bytes,
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented before
transmission. 2346 is the default setting.
DTIM Interval: Set the interval for DTIM. A Delivery Traffic Indication Message
(DTIM) is a countdown informing clients of the next window for
listening to broadcast and multicast messages. The default interval
is 1.
WMM Capable: WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for
your wireless network. Enable this option to improve the quality of
video and voice applications for your wireless clients.
TX Rates: Select the basic transfer rates based on the speed of wireless
adapters on your wireless network. It is strongly recommended to
keep this setting to Best.
D-Link DWR-961 User Manual
Wi-Fi Advanced
37