D-Link DWR-961 User Manual page 28

Section 4 - Configuration
Select either Obtain DNS server address automatically or Use
DNS Setting:
the following DNS address.
DNS Addresses: Enter the primary and secondary DNS server addresses.
Enable DHCP-PD: Check to enable the DHCP-PD feature.
LAN IPv6 Address: If you did not enable DHCP-PD, enter the LAN (local) IPv6 address
for the router.
LAN IPv6 Link-
Local Address: Displays the router's LAN link-local address.
Enable
Autoconfiguration: Check to enable the autoconfiguration feature.
Autoconfiguration
Select Stateful (DHCPv6) or SLAAC + Stateless DHCPv6. This will
Type:
determine the configuration type for you IPv6 LAN.
IPv6 Address
Range (Start): If you selected Stateful (DHCPv6), enter the address range start.
IPv6 Address
Range (End): If you selected Stateful (DHCPv6), enter the address range end.
IPv6 Address
Lifetime: Enter the IPv6 address lifetime (in seconds).
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-961 User Manual
Autoconfiguration (SLAAC/DHCPv6)
30