D-Link DWR-961 User Manual page 18

Section 4 - Configuration
The subsequent configuration pages will differ depending on the selection you
make on this page.
DHCP Connection
Choose this if your IPS automatically provides you with an IP
(Dynamic IP address. Most cable modems use this type of connection. See
Dynamic IP (DHCP) on page 8 for information about how to
Address):
configure this type of connection.
Username Choose this option if your Internet connection requires a
/ Password username and password to connect. Most DSL modems use
Connection this style of connection. See PPPoE (Username / Password) on
(PPPoE):
page 11 for information about how to configure this type of
connection.
Username
/ Password
Choose this option if your Internet connection requires Point-
Connection (PPTP): to-Point Tunneling Protocol (PPTP). See PPTP on page 13 for
information about how to configure this type of connection.
Username
/ Password Choose this option if your Internet connection requires Layer 2
Connection (L2TP): Tunneling Protocol (L2TP). See L2TP on page 15 for information
about how to configure this type of connection.
4G Connection:
Choose this connection if you have installed a SIM card into the
DWR-961. See 4G LTE on page 17 for information about
how to configure this type of connection.
Static IP Address
Connection: Choose this option if your Internet Service Provider (ISP)
provided you with IP address information that has to be manually
configured. See Static IP on page 10 for information about how
to configure this type of connection.
After entering the requested information,click Next to continue.
Note: If you are not sure what connection type to use or what settings
to enter, check with your Internet Service Provider (ISP).
D-Link DWR-961 User Manual 20