Kyocera KM-2810 Service Manual page 76

2H9-1
Maintenance
item No.
Checking/clearing counts by optional devices
U905
Description
Displays or clears the counts of DP.
Purpose
To check the use of DP. Also to clear the counts after replacing consumable parts.
Method
1. Press the start key.
Display
ADP
RADP
Clearing
1. Select the item to be cleared using the cursor up/down keys.
To clear the counts for all, select [ALL CLEAR].
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the total counter value
U908
Description
Displays the total counter value.
Purpose
To check the total counter value.
Method
1. Press the start key. The screen for total count value is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Clearing the black ratio data
U910
Description
Clears the accumulated black ratio data for A4 sheet.
Purpose
To clear data as required at times such as during maintenance service.
Method
1. Press the start key.
2. Select [ALL CLEAR] using the cursor up/down keys.
3. Press the start key. The accumulated black ratio data is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing copy counts by paper sizes
U911
Description
Displays and clears the paper feed counts by paper sizes.
Purpose
To check or clear the counts after replacing consumable parts.
Method
1. Press the start key. The screen for the paper feed counts by paper size is displayed.
Clearing
1. Press the start key.
2. Select the paper size using the cursor up/down keys.
To clear all counts, select [ALL CLEAR].
3. Press the start key. The count is cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-50
Description
Description
No. of single-sided originals that has passed through the DP
No. of double-sided originals that has passed through the DP