Kyocera KM-2810 Service Manual page 41

Maintenance
item No.
Adjustment: Center line adjustment
U034
1. Select the item to be adjusted using the cursor up/down keys.
Display
LEFT
MP TRAY
CASSETTE 1
CASSETTE 2
CASSETTE 3
DUPLEX
*: Setting the difference value from reference value
2. Press the system menu/counter key.
3. Press the start key to output a test pattern.
4. Press the system menu/counter key.
5. Change the setting value using the cursor left/right keys or numeric keys.
For output example 1, decrease the value. For output example 2, increase the value.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U034
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Adjustment of reference value
Paper feed from MP tray*
Paper feed from cassette 1*
Paper feed from optional cassette 2*
Paper feed from optional cassette 3*
Duplex mode (second side)*
Center line of printing
Correct image
U067 U072
(P.1-3-21) (P.1-3-26)
Description
Setting
range
0 to 1180
-70 to 70
-70 to 70
-70 to 70
-70 to 70
-70 to 70
Output Output
example 1 example 2
Figure 1-3-2
2H9-1
Initial Change in
setting value per step
235 0.04 mm
0 0.04 mm
0 0.04 mm
0 0.04 mm
0 0.04 mm
0 0.04 mm
1-3-15