Kyocera KM-2810 Service Manual page 62

2H9-2
Maintenance
item No.
Setting the IC card type
U222
Description
Sets the IC card type.
This is an optional device which is currently supported only by Japanese specification machines, so no setting
is necessary.
Operation panel lock
U223
Description
Sets the operation panel lock function to ON or OFF.
Purpose
To restrict operation in the system menu on the operation panel.
Setting
1. Press the start key.
2. Select the item using the cursor up/down keys.
Display
UNLOCK
PARTIAL LOCK
LOCK
Initial setting: UNLOCK
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the operation of the DP motor solenoids and clutch
U243
Description
Turns the motor, solenoids and clutch in the DP on.
Purpose
To check the operation of the DP motor, solenoids and clutch.
Method
1. Press the start key.
2. Select the item to be operated using the cursor up/down keys.
3. Press the start key. The operation starts.
Display
DP FEED MOT
DP REV PRS SOL
DP REV BRCH SOL
DP FEED CL
4. To stop operation, press the stop key.
Completion
Press the stop key when operation stops. The screen for selecting a maintenance item No. is displayed.
1-3-36
Description
Description
Release the lock of the operation from the system menu
Partially lock the operation from the system menu
Entirely lock the operation from the system menu
Motor, solenoids and clutch
DP paper feed motor is turned on.
DP switchback pressure solenoid is turned on.
DP switchback feedshift solenoid is turned on.
DP paper feed clutch is turned on.