Table of Contents
Advertisement
3.20 Audio Connectors
The HS-2613 has an onboard VIA VT1708A High Definition Audio
CODEC. The following tables list the pin assignments of the Line
In/Audio Out connector.
4 stereo DACs support 24-bit, 192KHz samples
DAC with 100dB S/N Ratio
2 stereo ADCs support 24-bit, 192KHz samples
ADC with 95dB S/N ratio
8-channels of DAC support 16/20/24-bit PCM format for 7.1 audio
solution
CN1: MIC In/Line Out Connector
PIN Description PIN Description
1
AOUTL
3
GND
5
MIC IN L
7
GND
3.21 CompactFlash Socket
The HS-2613 also offers a Type II CompactFlash socket is IDE
interface located at the solder side of the board. The designated CN28,
once soldered with an adapter, can hold CompactFlash cards of
various sizes. Please turn off the power before inserting the CF card.
Inserting a CompactFlash card into the adapter is not a difficult task.
The socket and card are both keyed and there is only one direction for
the card to be completely inserted. Refer to the diagram on the
following page for the traditional way of inserting the card.
JP3: CF Use Master/Slave Select
Options
Slave (default)
22
2
AOUTR
4
GND
6
MIC IN R
8
GND
Setting
Master
Short 1-2
Short 2-3
1
2
7
8
1
3
Advertisement
Table of Contents
