Page 1 Reference Manual Personal Computer CF-W4 Series Model No. We recommend that this Reference Manual be printed. To magnify all the icon display (for example, etc. To magnify the one part of the screen display...
Page 2: Read Me First
Read Me First Some of the illustrations in this manual may differ slightly in shape from the actual items on your computer. This should make the explanations easier to understand. If a user has logged on to Windows without the administrator authority, some functions may not be executable, and some screens may not be displayed as shown in this manual.
Page 3 Read Me First Illustrations and Terminology in this Reference Manual NOTE NOTE provides a useful fact or helpful information. CAUTION CAUTION indicates a condition that may result in minor or moderate injury. Enter This illustration means to press the Enter key. Fn+F5 This illustration means to press and hold the Fn key, then press the F5 key.
Page 4 Read Me First About Display Mode Internal LCD (Notebook) This computer's display External Display (Monitor) External display connected to this computer Simultaneous Display To display the same screen on both the LCD and (Intel(R) Dual Display Clone) external display Extended Desktop To use both the internal LCD and the external display as an extended display domain.
Page 5: Using The Touchpad
Using the Touch Pad Use the touch pad to move the cursor on the screen and perform computer operations. A. Work Surface (touch pad) B. Left Button C. Right Button Function Operation Moving the Cursor Move the tip of your finger lightly over the work surface.
Page 6 Using the Touch Pad NOTE You can change the speed of the double-click or the operations of mouse buttons using [Mouse Properties] screen. To display [Mouse Properties]: Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse]. When the cursor doesn’t move the way you want it to Sensitivity when touching the touch pad can be adjusted.
Page 7 Click [start] - [All Programs] - [Panasonic] - [Touch Pad utility settings]. If a message appears indicating that the Touch Pad utility is not yet running, click [start] - [All Programs] - [Panasonic] - [Touch Pad utility], and display the icon.
Page 8 Using the Touch Pad Remove your finger from the pad, then place your finger in the appropriate area to begin scrolling. (See figure below) The scroll direction and finger position on the touch pad can be changed using the settings in the Touch Pad utility. ( page 10) This explanation assumes the settings at the time of purchase.
Page 9 Using the Touch Pad Trace a circle around the touch pad without lifting your finger from the pad. The scroll direction can be changed using [Reverse the direction of the vertical scrolling] or [Reverse the direction of the horizontal scrolling] in the Touch Pad utility.
Page 10 Using the Touch Pad happens, remove your finger from the touch pad and begin again, this time starting from the center of the touch pad. For example, on a screen that will only scroll horizontally, even if you execute a vertical scroll, the screen will scroll horizontally.
Page 11 Using the Touch Pad Animated icon in task If you add a checkmark, the icon displayed when you tray (On/Off) touch the area to begin scrolling, and the icon displayed while you are scrolling, will change. Touch the area to begin scrolling Scrolling Rotate icon when wheel If you add a checkmark, the icon will rotate while you...
Page 12 Using the Touch Pad Reverse the direction of You can change the direction in which the screen scrolls the horizontal scrolling when you trace the touch pad clockwise from the position where you begin scrolling. • When checkmark is added: Scroll left •...
Page 13 Using the Touch Pad Using the Virtual Scrolling Function Set the Virtual Scrolling function using the following procedure. The Touch Pad utility will be disabled. Click the icon on the notification area, and click [Settings]. When the icon is not displayed: page 7, step Remove a checkmark from [Use Touch Pad function] in [General set-...
Page 14 Click [Virtual Scrolling], remove a checkmark from [Enable vertical scrolling] and [Enable horizontal scrolling], then click [OK]. Click [OK] at [Mouse Properties]. Click [start] - [All Programs] - [Panasonic] - [Touch Pad utility settings]. Click [General settings], add a checkmark for [Use Touch Pad function], then click [OK].
Page 15 Using the Touch Pad Adjusting the Sensitivity when Touching the Touch Pad Adjust [PalmCheck] and [Touch Sensitivity] using the following procedure: Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] - [Device Settings]. Click the device name in [Devices] (e.g. Synaptics TouchPad), then click [Settings].
Page 16 Using the Touch Pad PalmCheck ™ When operating the keyboard, if your hand touches the touch pad unintentionally causing the cursor to move, adjust the sensitivity using "PalmCheck™." • By dragging slide bar (A) to the [Maximum] position, you can prevent the cursor from moving unintentionally.
Page 17: Using The Fn Key
Using the Fn Key If you press a key for a character or symbol contained in a key while pressing the Fn key, the function for the character or the symbol contained in that key will be executed. CAUTION Do not press the following key combinations repeatedly in (quick) succession. Also, do not press different key combinations quickly one after another.
Page 18 Using the Fn Key Functions Pop-up Window (Displayed after logging on to Windows) Fn+F1 LCD brightness control (Fn+F1= down / Fn+F2= up) Fn+F2 Pressing this key combination adjusts the LCD brightness control. You can select a different brightness level setting for when the AC adaptor is connected and for when it is not connected.
Page 19 Using the Fn Key Functions Pop-up Window (Displayed after logging on to Windows) Fn+F3 Display change (When the external display is 　 connected) By pressing this key combination, you can select either an external display, internal LCD or simultaneous. ( page 112) CAUTION...
Page 20 Using the Fn Key Functions Pop-up Window (Displayed after logging on to Windows) Fn+F4 Speaker on/off switch Pressing this key combination turns on/off audio from the internal speaker and headphone jack. (MUTE) NOTE Turning off the speaker will also turn off the warning beep.
Page 21 Using the Fn Key Functions Pop-up Window (Displayed after logging on to Windows) Fn+NumLk Run the ScrLk (Scroll Lock) function 　 The functions differ depending on the application software being used. Fn+Home Lead to the last page or move the cursor to the 　...
Page 22 NOTE The Hotkey settings can be set separately for each user. Run the Hotkey Settings. Click [start] - [All Programs] - [Panasonic] - [Hotkey Settings]. Set the parameters. A. Use Fn key lock Add the checkmark if you want to enable the Fn key lock function. The following Fn key lock function will then be enabled.
Page 23 Using the Fn Key [Show status on screen]: Displays the Fn key status on the notification area. C. Disable popup Add the checkmark if you want to turn the popup window display function OFF. "Full Screen" of [Command Prompt] or MPEG files may change to a window display if the Fn+Fx key is pressed.
Page 24: Confirm The Status Using The Leds
Confirm the Status Using the LEDs Indicators Indicators Name Status Power indicator Not lit: Power off / Hibernation mode Green: Power on Blinking green: Standby mode NOTE The brightness of the power indicator changes in keeping with the brightness level of the internal LCD.
Page 25 Confirm the Status Using the LEDs Indicators Indicators Name Status This indicator lights green when the NumLk NumLk indicator (Ten-key mode) key is pressed. Part of the keyboard (see figure below) will func- tion as a ten-key numeric input. When the green light is on, part of the keyboard can be used to input numbers or calculation functions.
Page 26 Confirm the Status Using the LEDs Indicators Indicators Name Status A on the DVD-ROM & CD-R/RW Not lit left drive indicator Drive power is off. Green Drive power is on, but the DVD-ROM & CD-R/ RW drive is not accessed. Blinking green Drive power is on, and the DVD-ROM &...
Page 27: Battery Power
Battery Power Precautions about the Battery Pack Maintenance Do not touch the terminals on the battery pack and the computer. The battery pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly. Do not allow the battery pack to get wet.
Page 28 Battery Power • To see [start] menu. Click [start] - [All Programs] - [Panasonic]. Click [On-Line Manuals] or [Battery], and click [Important Tips]. • Right-click on the Economy Mode (ECO) icon , and click [Important Tips]. (If the [Important Tips] file has been deleted, [Important Tips] will not be displayed.)
Page 29 Battery Power Use the Battery Indicator to Check the Battery Status Battery Indicator Battery Status Not lit Battery pack is not connected or no charging. Orange light on / Charging in progress. *1*2 If [Battery Charging Indicator] in the [Main] menu of the flashing Setup Utility is set to [Flashing], the indicator will alternately become lighter and darker (Flashing)
Page 30 Battery Power Check the Remaining Battery Power There are three methods to check the remaining battery power. Press the Fn+F9 key. (After logging on to Windows)( page Check the Windows Power Meter. (After logging on to Windows)( page Check the number of bright LEDs. (When the power is off or in standby/hibernation mode)( page NOTE...
Page 31 Battery Power Press the Fn+F9 key to Check the Remaining Battery Power on the Screen (After logging on to Windows) When Economy Mode (ECO) is enabled When Economy Mode (ECO) is disabled When the battery pack is inserted When the battery pack is inserted in the computer (example) in the computer (example) When the battery pack is not...
Page 32 Battery Power Confirm the Battery Indicator (When the power is off or in standby/hibernation mode) You can view the remaining battery capacity using the following procedure. Close the display and confirm that the latch is locked. Disconnect the AC adaptor. Slide the power switch (A) and confirm the battery indicator (B).
Page 33 Battery Power Before the Remaining Battery Power Level Gets to Low We recommend that you become familiar with battery power confirmation methods ( page 30) and alarm settings to become aware when battery power is low. Alarm settings The following is factory default setting. When remaining battery capacity falls to 10% When remaining battery capacity falls to 5% [Low battery alarm]...
Page 34 Battery Power Set alarm operations and remaining battery level for operating alarm functions. When disabling the speaker by pressing the Fn+F4 key, the sound alarm is also disabled. By the key combination the Fn+F5 key, there will be lower sound alarm.
Page 35 Attach the battery pack, then connect the AC adaptor. Remove all peripherals (except for the battery pack and AC adaptor). Close all applications. Perform Battery Recalibration. Click [start] - [All Programs] - [Panasonic] - [Battery] - [Battery Recalibration]. At the confirmation message, click [Start].
Page 36 Battery Recalibration can also be performed by following the procedure below. Restart the computer. Press the F9 key while the [Panasonic] boot screen is displayed a few moments after the computer begins the startup procedure. When the Battery Recalibration Capacity is displayed, press the Enter key.
Page 37 Switching the Economy Mode (ECO) Right-click either the (Disable) or the (Enable) Economy Mode (ECO) icon on the notification area. If the icon is not displayed, click [start] - [All Programs] - [Panasonic] - [Battery] - [Economy Mode(ECO) Setting Utility].
Page 38 Battery Power Click [Economy Mode(ECO) Enable] or [Economy Mode(ECO) Disable]. If [Economy Mode(ECO) Enable] is set When remaining battery power is 81% or more The battery will discharge until the remaining battery power is 80% or less. During discharge, the Economy Mode (ECO) indicator will blink. When the confirmation message is displayed, read the message on the screen carefully, and click [OK].
Page 39 Battery Power NOTE When the cursor is placed over the "Economy Mode (ECO) icon" ( ), the current Economy Mode (ECO) will be displayed in a pop-up text. After disconnecting the battery pack, if you connect it to a computer on which the Economy Mode (ECO) settings differ, the battery will either recharge or discharge until the next time the computer is turned on, giving priority to the battery pack setting on that computer.
Page 40 Battery Power Insert the battery pack. Slide the left-side latch (locked manually: A) to the unlock position Making sure the battery pack is facing the correct direction, slide it in the direction of the arrow. Slide the left-side latch (A) to the lock position , and then check to ensure that the battery pack is held firmly.
Page 41: Computing On The Road
Always watch your battery level! Power-saving Methods At the time of purchase, [Power schemes] is set to [Panasonic Power Management], but you can reduce power consumption using the following method. When using the battery, the computer can be used for a longer period of time.
Page 42 Computing on the Road Adjust the brightness (darker) with the key ( page Leave your computer off when it is not in use (⇒ Operating Instructions "Starting Up/Shutting Down") Remove peripheral devices (USB devices, PC Cards, external mouse, etc.) when not in use Turn off the wireless LAN function when it is not in use ( page 131)
Page 43 Computing on the Road The drive power remains off when the computer is started up. The DVD-ROM & CD-R/RW drive consumes power just by being on, even when it is not being used. Turning this [Off] will reduce the power consumption. Even if this is set to [Off], if Windows has been started up, the drive power can be turned on using the drive power/open switch.
Page 44 Computing on the Road • If a mini port replicator is connected, remove the checkmark from this item. If the checkmark is added, it may be impossible to use the USB ports (2a, 2b, 2c) on the mini port replicator. If this occurs, remove the checkmark, then restart the computer.
Page 45: Standby/Hibernation Functions
Standby/Hibernation Functions Starting Up Your Computer Quickly If you use the standby or hibernation function, you can shut down the computer without closing programs and documents. When restarting your computer from either the standby or hibernation mode, you can immediately continue working in all programs or documents that were open at the time the computer was placed into standby or hibernation mode.
Page 46 Standby/Hibernation Functions Precautions Before entering the standby or hibernation mode Save any unsaved data and save any files you may be editing. When a file in an external device such as a CD/DVD drive, external hard disk, or ATA card is opened, close the file.
Page 47 Standby/Hibernation Functions When entering the standby or hibernation mode Standby mode: until the power indicator blinks green Hibernation mode: until the power indicator goes off Avoid the following: • Touching the keyboard, touch pad or power switch • Using external mouse or other peripheral devices •...
Page 48 Standby/Hibernation Functions Entering the Standby or Hibernation Mode Use any of the following methods to enter the standby or hibernation mode. To use the hibernation mode, set [Power Options] in advance (below). Press the Fn+F7 key or the Fn+F10 key to put your computer in the standby or hiberna- tion mode ( page Using the power switch (...
Page 49 Standby/Hibernation Functions Using the Power Switch At the time of purchase, the computer is set so that standby mode can be used. Setting Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced]. Click [Stand by] or [Hibernate] for [When I press the power button on my computer], and then click [OK].
Page 50 Standby/Hibernation Functions When Closing the Display At the time of purchase, the computer is set to go into standby mode. Setting Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced]. Click [Stand by] or [Hibernate] for [When I close the lid of my portable computer], and then click [OK].
Page 51 Standby/Hibernation Functions • Entering either the standby or hibernation mode again • Operating the drive power/open switch • Operating the wireless LAN switch • Inserting and removing the SD memory card Using the Power Switch When the computer has gone into standby or hibernation mode, resume operations using the following procedure.
Page 52: Security Measures
Security Measures To prevent unauthorized access of your computer, the various security measures are provided below. Situation Function to use You do not want the settings in the Setup Supervisor Password ( page Utility to be changed User Password ( page You do not want your computer to be Password on boot (...
Page 53 Security Measures • If the Windows log on password is forgotten: Computer administrator’s password: If you have created a password reset disk (⇒ Operating Instructions "First-time Operation"), a message will be displayed when the wrong password is entered Reset the password according to the message. If you have not created a password reset disk, after reinstallation set up Windows and reset the password.
Page 54 Security Measures Using either the key or the key, select [Set Supervisor Password] and press the key. Enter Only when the Supervisor Password has been set: Enter your password at [Enter Current Password] and press the key. Enter Enter your password at [Enter New Password] and press the Enter key.
Page 55 Security Measures Setting the User Password (enabling, changing, disabling) User Password is set when several people will be using this computer. For example, the system administrator sets the Supervisor Password and the User Password, and only advises the other users of the User Password. In this way, other users can be restricted from changing the Setup Utility.
Page 56 Security Measures Re-enter your password at [Confirm New Password] and press the key. Enter To disable the User Password Press only the Enter key. At [Setup Notice], press the key. Enter When you do not want the User Password enabled or changed without permission: Set [User Password Protection] using the following procedure: Using the...
Page 57 Security Measures Setting the Password on boot (enabling, disabling) Run the Setup Utility. ( page 138) Using either the key or the key, select [Security]. Using either the key or the key, select [Password on boot] and press the key. Enter Select [Enable] or [Disable].
Page 58 Security Measures Set the Windows Log on Password If the Windows log on password is set, a password input screen will be displayed when you log on to Windows. To set the password, it is necessary to first create a log on user. To set a password after the log on user has been created, execute step , and then execute steps...
Page 59 Security Measures Click the account for which the password will be set. If you are logging on to Windows as a limited user, the screen of step will be displayed. Click [Create a password]. Input the password, and then click [Create Password]. NOTE If the checkmark has been removed from [Prompt for password when computer resumes from standby] in [start] - [Control Panel] - [Performance and Maintenance] -...
Page 60 Security Measures When you do not want the data stored on the hard disk to be read/written When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is inserted in a different computer. When the hard disk is returned to the original computer, you can read and write data as before.
Page 61 Security Measures Using either the key or the key, select [Set Supervisor Password] and press the Enter key. Enter your password at [Enter New Password], and press the Enter key. Re-enter your password at [Confirm New Password], and press the Enter key. At [Setup Notice], press the Enter key.
Page 62: Dvd-Rom & Cd-R/Rw Drive
DVD-ROM & CD-R/RW Drive Usage Precautions Before using the drive Do not expose the DVD-ROM & CD-R/RW drive to excessive smoke that may leave a residue, e.g., oil smoke or tobacco smoke. Doing so could shorten the life of the drive lens.
Page 63 DVD-ROM & CD-R/RW Drive About recognition of media It may take about 30 - 40 seconds for an image recorded to a rewritable media to be played back. While the DVD-ROM & CD-R/RW drive is being accessed Do not open the DVD-ROM & CD-R/RW drive or move the computer while the DVD-ROM &...
Page 64 Log on to Windows with the administrator authority. Confirm whether the DVD-ROM & CD-R/RW drive power is on. If the drive power is off, turn it on. Click [start] - [All Programs] - [Panasonic] - [Optical Disc Drive Letter-Setting Utility]. Click in [New drive letter], click the drive letter, and click [OK].
Page 65 DVD-ROM & CD-R/RW Drive Turn the DVD-ROM & CD-R/RW drive power on/off When you are not using the DVD-ROM & CD-R/RW drive, you can turn the drive power off to minimize power consumption. Situation Function to use Related pages When you want to The drive power/open switch page 67 turn on and off quickly...
Page 66 DVD-ROM & CD-R/RW Drive When the power to the DVD-ROM & CD-R/RW drive is turned off, the message "The ‘USB Mass Storage Device’ device can now be safely removed from the system" will appear, but the DVD-ROM & CD-R/RW drive is an internal device, so it cannot be removed.
Page 67 DVD-ROM & CD-R/RW Drive Turning on or off immediately There are two methods, as follows. You can switch the drive power regardless of whether or not there is a disk in the drive. Use [Manual Switching] of the Optical Disc Drive Power-Saving Utility. Click the icon or the icon on the notification area.
Page 68 [Exit]. To restart this utility, click [start] - [All Programs] - [Panasonic] - [Optical Disc Drive Power- Saving Utility], or restart the computer. When the cursor is placed over the icon or the icon, pop-up text will indicate the drive status and the setting time.
Page 69 DVD-ROM & CD-R/RW Drive • When the disk cover is open • When a disk is set in the drive • When an external CD/DVD drive is connected (Including using a virtual CD drive) • When WinDVD is running • When the drive is being used by an application such as B's Recorder...
Page 70: About Cd Media
About CD Media Do not use disks that have become deformed, warped, or are not completely round. Depending on the condition (record quality, cracks, dirt, modification, copy protection, type of drive/disk maker used when creating the disk, etc.) of a disk, it may not be possible to be read or play it correctly.
Page 71 About CD Media • Video-CD • Photo-CD (To play, specific VIDEO CD software is required.) Writing or Rewriting Data to Disks When using CD-R or CD-RW disks, read the description on the disk package. To write CD-R/RW disks, writing software is required. ("B's Recorder" and "B's CLiP" are installed at the time of purchase.
Page 72 About CD Media Handling Disks with Care Before using disks, carefully read through the Operating Instructions, the instructions for handling the disks, and whatever is written on the disk packaging. If the disks are not handled properly, they may become dirty or scratched, the writing speed may be reduced or data may not be recorded or played back properly.
Page 73: About Dvd Media
About DVD Media Do not use disks that have become deformed, warped, or are not completely round. Depending on the condition (record quality, cracks, dirt, modification, copy protection, type of DVD recorder or disk maker used when creating the disk, etc.) of a disk, it may not be possible to be read it correctly.
Page 74 About DVD Media Type and Types of Functions available logo mark files ( : yes; ×: no; : no (disk specifications)) written Read / Play Write / Software is required to play DVD videos. Rewrite (WinDVD has been installed in this computer) DVD-RAM Data 1.4G/2.8G...
Page 75 About DVD Media Type and Types of Functions available logo mark files ( : yes; ×: no; : no (disk specifications)) written Read / Play Write / Software is required to play DVD videos. Rewrite (WinDVD has been installed in this computer) +R DL Data Write...
Page 76 About DVD Media About Regions Setting The DVD-Video has a region code that is fixed according to the region where it is sold. In order to play a DVD-Video, the region code of the player software and of the drive must match that of the DVD-Video.
Page 77: Inserting/Removing A Disk
Inserting/Removing a Disk CAUTION When inserting or removing a disk, be careful not to touch the drive lens. Slide the drive power/open switch (A) while the computer's power is A "beep" will sound, and the disk cover will open slightly. (When the speaker function is disabled, e.g., by the key combination the Fn+F4 key, there will be no sound.
Page 78 Inserting/Removing a Disk Removing Hold down on the center spindle (C) and gently lift up on the edge of the disk. Close the disk cover. Press down near the drive power/open switch (position of the arrow) to ensure that the cover is locked. NOTE For AutoPlay CD/DVD: •...
Page 79 Inserting/Removing a Disk When the disk cover cannot be opened To remove a disk when the disk cover cannot be opened or when the computer is powered off: Insert a pointed object (e.g., the bent-out tip of a paper clip, or the tip of a ballpoint pen) into the emergency hole (A), and move in the direction of the arrow.
Page 80: Watching Dvd Video (Windvd)
Watching DVD Video (WinDVD) WinDVD is a software application for DVD playback. Here you will find explanations and general information on precautions to take. Refer to the online manual for the detailed use of the software application. page Running WinDVD You can run WinDVD using either of the following procedures: Double-click the icon on the desktop.
Page 81 Watching DVD Video (WinDVD) Take steps to ensure that no other player software is allowed to coexist with WinDVD. It may not be possible to play images properly if any player software other than WinDVD is installed. There are some DVD-Videos available on the market that work by installing their own player software.
Page 82 Watching DVD Video (WinDVD) SUPPORT INFORMATION If WinDVD does not operate properly, we recommend carefully reading the online help file first for problems with the operating environment or operations. If you still cannot troubleshoot the problem, follow the steps below to contact InterVideo, Inc.
Page 83 Watching DVD Video (WinDVD) To have MPEG files played back automatically on WinDVD: Remove the checkmark from [Movie file (mpeg)] on screen A or B on the left. ® A. When starting up Windows Media Player for the first time, one of the setting screens will be displayed.
Page 84 Watching DVD Video (WinDVD) To repeat a screen currently being played immediately If there is a in the triangle on the play button, the auto-repeat function can be enabled by clicking the play button so that the contents will be played repeatedly. To return to regular play mode, click the play button again.
Page 85 Watching DVD Video (WinDVD) If you cannot play the disk contents smoothly: In the case of some operating environments or DVD videos, playback may not be smooth, or audio may become distorted when using fast-forward ("time stretch"). Right-click the WinDVD screen, click [Setup] - [Video]. Confirm that the checkmark is added to [Use Hardware Decode Acceleration].
Page 86 Watching DVD Video (WinDVD) If you have uninstalled WinDVD accidentally: Reinstall it by following the steps below. Log on to Windows with the administrator authority. Set the Product Recovery DVD-ROM in the DVD-ROM & CD-R/RW drive. Input [d:\windvd\setup.exe] in [start] - [Run] and click [OK]. Follow the on-screen instructions and install WinDVD.
Page 87 Writing to CDs (B's Recorder/B's CLiP) "B's Recorder" and "B's CLiP" are CD recording software applications developed by B.H.A Corporation. Following is general information about B's Recorder and B's CLiP. B's Recorder: Enables you to create data CDs, music CDs, or video CDs, or copy CDs. •...
Page 88 Writing to CDs (B's Recorder/B's CLiP) • Double-click the icon on the desktop. • Click [start] - [All Programs] - [B.H.A] - [B's Recorder GOLD8 BASIC] - [B's Recorder GOLD8]. TaskGate Start up the application using one of the following methods. •...
Page 89 Writing to CDs (B's Recorder/B's CLiP) B's CLiP Cannot read from or write to CD-R disk using B's CLiP. Only CD-RW is available. Do not use the Fast User Switching function. If this function is used, the icon or the icon will no longer be shown on the notifica- tion area after the switching is complete, and B's CLiP cannot be used.
Page 90 Writing to CDs (B's Recorder/B's CLiP) Double-click the icon on the desktop. Click [start] - [All Programs] - [B.H.A] - [B's Recorder GOLD8 BASIC] - [B's Recorder GOLD8]. Set a media (disk) in the DVD-ROM & CD-R/RW drive. Use a new disk. If a disk that contains data is set, the message "Insert a disc into the drive"...
Page 91 Writing to CDs (B's Recorder/B's CLiP) Select the required bootable disk image from [Floppy Disk Image Management], and click [OK]. NOTE At the time of purchase, this computer is equipped with images that can be booted from this computer. The bootable disk image is saved in the folder "c:\Program Files\B's Recorder GOLD8."...
Page 92 Writing to CDs (B's Recorder/B's CLiP) • Not found CDROM !! Check CD-ROM power and IDE cable. CD-ROM drive is not available. <When booting the system on a computer is connected an ATAPI (IDE) drive> CD-ROM Drive is not ready, aborting installation. This computer cannot be booted using a disk created using boot disk image (5) or (6).
Page 93 Writing to CDs (B's Recorder/B's CLiP) After formatting the disk, if the disk does not mount (is not recognized), remove it, and insert it again. Eject the formatted disks as described below. When ejecting the disk while the icon is displayed on the noti- fication area Right-click the icon and click [Eject].
Page 94 Writing to CDs (B's Recorder/B's CLiP) When the installation is complete, the display will say that the computer should be restarted after removing the disk, nevertheless, be sure to restart it without removing the Product Recovery DVD-ROM. When B's Recorder is reinstalled, after restarting the computer, click [start] - [Run], input [d:\bha\update\bsupdate.exe] , and click [OK].
Page 95 PC Cards This slot conforms to the PC Card Standard; therefore, communications and SCSI devices may be utilized. There are three types of card, differentiated by their thickness: Type I (3.3 mm), Type II (5.0 mm), and Type III (10.5 mm). The slot allows you to use one Type I or Type II card.
Page 96 PC Cards Inserting/Removing the PC Card Inserting a PC Card Simply slide the PC Card right-side-up until it snaps into place. Refer to each card’s operating instructions for proper insertion. After the card is inserted, bend the eject button (A). CAUTION When using a PC Card to connect a peripheral device (SCSI, IEEE 1394, etc.), install following the procedures below.
Page 97 PC Cards Removing a PC Card CAUTION Do not remove a PC Card while your computer is in the standby or hibernation mode. Note that the PC Card removal may not be complete, depending on the status of the PC Card or the device connected to the PC Card; this may occur when a SCSI card is used to connect an external hard disk to the computer.
Page 98: Sd Memory Card
SD memory card format software. (Do not use [Format] of Windows.) Formatting software can be downloaded from our web site. Address: http://panasonic.jp/support/audio/sd/download/sd_formatter_e.html When using the SD memory card with other peripheral devices, format the SD memory card using the peripheral device. For details, refer to the device’s instruction manual.
Page 99 (checkout), edit, or save data. We recommend backing up important data to another storage medium. Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages, direct or indirect. When disposing of cards, we recommend that you physically destroy the card (for example, by using a hammer) to prevent personal or confidential data from being leaked.
Page 100 SD Memory Card Inserting/Removing the SD Memory Card Inserting the Card Insert the card firmly with the label side facing up and with the cut corner in front. Make sure you insert the card in the proper direction. Improper insertion may result in damage to the card or slot.
Page 101 SD Memory Card Removing the Card CAUTION Disable the card function before removing the card. Do not remove the card in the following conditions. Important data may be damaged, or it may not be possible to properly access the card the next time it is inserted. •...
Page 102: Sd Memory Card Security Function
SD Memory Card Security Function For the SD memory card security function, you can configure and insert an SD memory card instead of entering a password for following cases. When power on the computer When logging on to Windows/ resuming from the standby or hibernation mode, or the screensaver Windows log on screen Set the SD memory card...
Page 103 [OK]. Start the SD Card Setup program. Click [start] - [All Programs] - [Panasonic] - [SD Card Setup]. If an SD memory card has not been inserted, the following message appears: [Set the SD card in place]. Insert an SD memory card and click [Retry].
Page 104 SD Memory Card Security Function Click [Next] in the Welcome screen. Select the SD memory card setting method (A). [Leave set] When [Leave set] is selected, leaving the SD memory card set serves as a substitute for inputting the password. (The card may be removed after the computer or Windows is started.) [Set and eject] When [Set and eject] is selected, setting and ejecting the SD memory card...
Page 105 SD Memory Card Security Function If the Supervisor Password has been set Enter the Supervisor Password, then click [OK]. If the Supervisor Password has not been set Follow the on-screen instructions to set the Supervisor Password. Enter the Supervisor Password, then press Tab. Reenter the Supervisor Password for confirmation, then click [OK].
Page 106 SD Memory Card Security Function Set the Windows log on user name and password. Enter the user name, then press Tab. Enter the password, then press Tab. Reenter the password for confirmation. [Do not check the user name] When you do not add the checkmark for [Do not check the user name] (factory setting), the user name will be registered on the SD memory card only when the input user name has been set on this computer.
Page 107 SD Memory Card Security Function When logging on to Windows / When resuming from the standby or hibernation mode, or the screensaver If [Set and eject] was selected as the setting method: Insert the SD memory card, then eject it after you hear a beep indicating card recognition. (When the speaker function is disabled, e.g., by the key combination the Fn+F4 key, there will be no beep sound.
Page 108 SD Memory Card Security Function Change the settings or configure another SD Card. A. Setting for this computer You can change the settings registered in this computer. [Use the SD card when starting the computer] This setting can also be changed on the [Security] menu of the Setup Utility. •...
Page 109 SD Memory Card Security Function B. Setting for this SD card You can configure the SD memory card currently inserted with security functions or change its settings. If no SD memory card is inserted, none of the fields under [Setting for this SD card] can be selected. [Use when starting the computer] •...
Page 110 SD Memory Card Security Function Click [OK]. Operation differs depending on the setting. If you add the checkmark for [Use the SD card when starting the computer]: Step of [Use when starting the computer] in Step page 104) If you remove the checkmark for [Use the SD card when starting the computer]: Enter the password and click [OK].
Page 111 SD Memory Card Security Function • If an SD memory card is already inserted when resuming from the standby or hibernation mode, or the screensaver, the password input screen appears. Input the password. • Even if [Leave set] is selected, do not leave the card in the SD memory card slot when stepping away from the computer.
Page 112: External Display
External Display You can connect an external display to use a large screen, or connect an LCD projector to give a presentation. For explanations of display mode terminology, refer to "Read Me First" ( page Power off your computer. (⇒ Operating Instructions "Starting Up/Shutting Down") Do not use the standby or hibernation function.
Page 113 External Display Click the display destination, and then click [Apply]. • When the screen is displayed to an external display: [Monitor] • When the screen is displayed to the internal LCD: [Notebook] • When the screen is displayed to a simultaneous display: [Intel(R) Dual Display Clone] •...
Page 114 External Display Carefully read the operating instructions of the external display. When connecting a monitor that does not conform to the Plug & Play standards: Either select the correct external display driver use in the following menu, or use the driver disk that was supplied with your monitor.
Page 115 External Display Extended Desktop Click [Extended Desktop] ( page 113, step C), and make the settings for [Primary Device] and [Secondary Device]. Click , select the display from the menu, and then click [OK]. The pop-up window displayed by the Fn key combination is shown only on the primary device.
Page 116 External Display When there is no display when the Extended Desktop is disabled: The application running is being displayed in the external display. Set the Extended Desktop again, move the application from the external display to the internal LCD and then disable the Extended Desktop.
Page 117: Usb Devices (External Mouse Etc.)
USB Devices (External Mouse etc.) You can use various USB peripherals, such as a floppy disk drive, external mouse, printer, or image scanner. Connecting/Removing USB Devices Connecting USB Devices Connect the USB device to the USB port (A) on your computer, referring to the operating instructions of the USB device.
Page 118 USB Devices (External Mouse etc.) Removing USB Devices CAUTION Do not remove a USB device while your computer is in the standby or hibernation mode. Save important data and close each application. Disable the device function. (This step is not necessary when the USB device has been removed after the computer is turned off, if the icon is not displayed, or if the USB device that is going to be disconnected is not displayed in step A.)
Page 119 USB Devices (External Mouse etc.) Click [start] - [Control Panel] - [Add or Remove Programs] - [Touch Pad utility], and then click [Change/Remove] to remove the program. Remove the program by following the on-screen instructions. If the message [Locked File Detected] is displayed, click [Reboot]. Click [start] - [Control Panel] - [Add or Remove Programs] - [Synaptics Pointing Device Driver], and then click [Change/Remove] to remove the driver.
Page 120 USB Devices (External Mouse etc.) The procedure may depend on the external mouse driver you are using. For more information, refer to the instructions manual provided with the mouse driver. After the driver is removed, shut down Windows and turn off the computer.
Page 121 USB Devices (External Mouse etc.) USB Floppy Disk Drive Note the following when using an optional USB floppy disk drive (CF-VFDU03). Avoid the followings while the floppy disk drive is being accessed. Doing any of these may damage the data on the floppy disk and render it useless. •...
Page 122 Modem Connecting the Internal Modem with a Telephone Jack CAUTION Do not use the PBX internal phone lines installed in company offices. Doing so may lead to a fire or electric shock. It is not possible to connect the modem to any of the following lines. •...
Page 123 Modem Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]. To remove the cable, pull out while pressing down on the tab. Ring Resume Function With this function, if the telephone that is connected to the modem rings in the standby mode, the power of the computer automatically switches ON.
Page 124 Modem Click [Devices] - [Properties]. Click [Receive], and then add the check mark for [Enable device to receive] and click [OK]. Click [Device Manager] in [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware]. Double-click [Modems], and then double-click the internal modem. Click [Power Management], add the check mark for [Allow this device to bring the computer out of standby], then click [OK].
Page 125 Modem Setting for [System standby] • Roughly consider the communication time and then set [System standby]. There may be cases where the computer enters the standby mode after the time set for [System standby] elapses, even during communications, and cuts off the communications.
Page 126 There are specific settings required to set up LAN connection. Be sure to check system administrator before attempting to your LAN. When connecting multiple computers or peripheral devices in a home or office via a network, printers or files can be shared among several computers. Connecting LAN CAUTION Do not connect the modem telephone cable into the LAN port.
Page 127 CAUTION Do not use the standby or hibernation functions during communications (except when the Wake Up from LAN function is in use), as this may cause an error in data transmission or reception. The timeout function may engage even during data transmissions, causing the computer to automatically go into standby or hibernation mode.
Page 128 Enabling the Wake up from LAN Function This is a function of the internal LAN to automatically power the computer from a network server when the computer is in the standby or hibernation mode. To use this function, it is necessary to have a network environment that accommodates Wake up from LAN.
Page 129 The computer may start up if accessed by another computer on the network. The following procedure can be used to prevent startup due to unintentional access by a computer. Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
Page 130: Wireless Lan
Wireless LAN (only for models with wireless LAN) If you use a wireless LAN, you can access a network without cable connections. Wireless LAN communication methods • Infrastructure mode For data transactions between two or more computers with wireless LAN functions, using an access point Use this communications mode if you are connecting to the Internet via a wireless LAN access point.
Page 131 Wireless LAN (only for models with wireless LAN) Precautions Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect the operation of devices in the vicinity Abide by instructions regarding use in airplanes and hospitals. If you intend to use the computer in the environments described above, turn off the wire- less LAN.
Page 132 Wireless LAN (only for models with wireless LAN) Enable/Disable Wireless LAN Standard IEEE802.11a In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law. Comply with the laws in the country concerned. (⇒ Operating Instructions "Read Me First") Click the icon (when the wireless LAN is on) or the icon...
Page 133 Wireless LAN (only for models with wireless LAN) Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager]. Double-click [Intel(R) PRO/Wireless..] at [Network adapters]. Click [Advanced], and then click [Wireless Mode] in [Property]. Remove the checkmark from [Use default value], and select the settings (e.g., [802.11a and 802.11g]).
Page 134 Set to [Enable] using the following procedure. Restart the computer. Press the F2 key while [Panasonic] boot screen is displayed soon after the computer begins the startup procedure. If a password is set, [Enter Password] will be displayed. Enter your password, and press the Enter key.
Page 135 Wireless LAN (only for models with wireless LAN) setting described below is only an example. For the other settings, ask your system administrator or the person in charge of the network.) Select [WEP] on [Data Encryption]. Select [64-bit] or [128-bit] from [Encryption Level]. Input the Encryption key in [Wireless Security Password (Encryption Key)] In the case of pass phrase: [64-bit (5 characters)] [128-bit (13 characters)].
Page 136 Wireless LAN (only for models with wireless LAN) When using encryption, set the same encryption and the same network key on both computers. Check the Wireless LAN Communication Status ® Open the Intel PROSet/Wireless Software using either of the following procedures: Double-click the icon, the icon or the...
Page 137: Mini Port Replicator
Mini Port Replicator A Mini Port Replicator is available as an option (CF-VEBU05U). This device eliminates the hassles of having you connect/disconnect the various cables when carrying your computer around and allows a variety of peripherals to be connected including the USB port, the LAN port and the external display port.
Page 138: Setup Utility
Running the Setup Utility Turn on or restart the computer. Press the key while [Panasonic] boot screen is displayed soon after the computer begins the startup procedure. When the password is set, the screen shown at left will be displayed. Enter your password, and press the Enter key.
Page 139 Setup Utility NOTE Cannot display the Setup Utility screen in simultaneous display. By pressing the Fn+F3 key, display destinations can be changed either external display or the internal LCD. When [Password on boot] in the Setup Utility is set to [Disable]: •...
Page 140 Setup Utility How to use the screen A. You can select menu items by moving the cursor with the key and the key. B. If there are several selectable items, you can choose the desired item by pressing the key and the key.
Page 141 Setup Utility Key Operations To display the corresponding "help" file (Press the key or the key to display next help page or previous help page. Press the F1 key to return to the original screen.) To display the [Exit] menu To move among the items (Use these keys when selecting the item.) To move among the menus (Use these keys when the [Information], [Main], [Advanced], [Security], [Boot], or [Exit] menu is selected.)
Page 142 Setup Utility Information Menu (An underline indicates the factory default settings) Language English • Select the language for displaying the Setup Utility. Japanese Model No. To display and Serial No. confirm information. CPU Type These items cannot CPU Speed be selected or BIOS changed.
Page 143 Setup Utility (An underline indicates the factory default settings) Fn/Ctrl Key Normal • Select whether to switch the Fn key with the Ctrl key functions, and vice versa on the internal Replace keyboard. • Do not attempt to replace the markings on the keys, or the keys themselves. Display External Monitor •...
Page 144 Setup Utility Advanced Menu NOTE The [Advanced] menu cannot be changed when the Setup Utility is started up with the User Password. (An underline indicates the factory default settings) Modem Disable • Select whether to use the internal modem function ([Enable]) or not ([Disable]). Enable (This does not work for the external modem.) Disable...
Page 145 Setup Utility Security Menu NOTE When the Setup Utility is started up with the User Password, only a limited number of items can be displayed and set. ( page 138) When starting up the computer, if the message [Hard disk access is prohibited "Hard Disk lock"] appears, start up the Setup Utility, and change the settings to match the details when the hard disk protection was set.
Page 146 Disable • Select whether to display ([Enable]) or not to display ([Disable]) the message "Press F2 for Enable Setup/F12 for LAN" shown on the bottom of the [Panasonic] boot screen that is displayed after starting this computer. Boot First Menu Disable •...
Page 147 To move a device down by one, select the device in [Boot priority order] using the key, and press the F5 key. Panasonic USB floppy disk drive (CF-VFDU03 (optional)) can be used for startup (recommended). To return the startup order to the default settings, press 1.
Page 148 The device for starting up the operating system can also be selected during computer start-up. After the computer is turned on and the Esc key is pressed at [Panasonic] boot screen, [Boot Menu] (the device selection screen) will appear. When the [Boot Menu] setting is changed, the selection screen display will also change.
Page 149 Setup Utility Get Default Values Set the Setup Utility to the default settings. • This item is not displayed when starting up the Setup Utility with the User Password. Load Previous Values Load previous values from CMOS for all Setup items. Save Current Values Save your changes to CMOS.
Page 150: Icon Enlarger
In this case, overlay the cursor to display pop-ups, scroll the screen, or use other functions to display the hidden elements. Close all running application before starting "Icon Enlarger." Click [start] - [All Programs] - [Panasonic] - [Icon Enlarger]. Click the display size as [Normal Size], [Large Size], or [Extra Large Size].
Page 151: Loupe Utility
When using Loupe Utility for the first time, run it from the [start] menu. Use Loupe Utility Run Loupe Utility Click [start] - [All Programs] - [Panasonic] - [Loupe Utility]. If you want to run Loupe Utility automatically when starting Windows next time: Add the checkmark for [Register in Startup].
Page 152 Loupe Utility Enlarging a Part of the Screen Point the cursor ( ) to the place on the screen where you want to enlarge. Right-click while pressing the key. The area indicated by the cursor will be enlarged. You can also show the enlarged display by double-clicking on the icon on the notification area, or right-clicking on the icon and clicking [Show Loupe].
Page 153 Loupe Utility original screen changes. To reflect the changes, click the enlarged-display window (A). There are some applications that may not be enlarged properly. Set Loupe Utility Right-click the icon on the notification area. Click [Settings]. Changing the operation when showing/hiding the enlarged-display window Set key combinations for displaying the enlarged-display window by using an external mouse, touch pad, or keyboard.
Page 154 Loupe Utility Display explanation when the Loupe Utility is started Add the checkmark for [Show tips at start up Loupe Utility] (H). Click [OK]. To enlarge the display 2x or 3x Right-click the icon, and then click [2x enlargement] or [3x enlargement].
Page 155: Problems With Starting Up, Shutting Down, And Standby And Hibernation Mode
Consult the peripheral manufacturer. Using the following procedure, start up in Safe Mode, and check the error details. Turn on the computer, and when the [Panasonic] boot screen disappears if one is set) hold down the F8 key. (after entering the password Release the key when the Windows Advanced Options Menu appears, and with key, select [Safe Mode], then press the Enter key.
Page 156 Problems with Starting Up, Shutting Down, and Standby and Hibernation Mode There is a beep sound, and either "Extended RAM Module Failed" or "Standard RAM Failed" appears If "Extended RAM Module Failed" appears, the RAM module is not correctly inserted. Turn off the computer, check that the RAM module is a recommended module, then insert it correctly.
Page 157 "Administrator" in [User name], and enter the password if one is set, then click [OK]. Cannot boot from a floppy disk Check if there is a Panasonic external floppy disk drive connected (CF-VFDU03). It is not possible to boot from other floppy disk drives. Check that the boot disk is correctly inserted.
Page 158 Problems with Starting Up, Shutting Down, and Standby and Hibernation Mode If after all the checks, the same message still appears, there may be a problem with the hard disk. Perform the reinstallation procedure and return the hard disk to its condition at the time of purchase.
Page 159 Problems with Starting Up, Shutting Down, and Standby and Hibernation Mode The computer does not resume from standby or hibernation mode One of the following operations may have been carried out. • In standby mode, the AC adaptor or battery pack was disconnected, or a peripheral was connected or disconnected.
Page 160: Problems With Passwords And Messages
Problems with Passwords and Messages Even after entering the password, [Type your password] is displayed again The computer may be in ten-key mode. lights up, press the NumLk key, to disable the ten-key mode, and then input. The computer may be in Caps Lock mode. lights up, press the Caps Lock key, to disable the Caps Lock mode, and then input.
Page 161 Problems with Passwords and Messages When the administrator password is forgotten Check whether you have created a password reset disk. • If you have: A message is displayed when you fail to correctly enter the password. Follow the message's instructions and set the password again. •...
Page 162: Problems With Operation During Use
Problems with Operation during Use Cannot start a network-used program, or cannot share files or printers If you cannot start up a program or share files, this may be because the "Firewall (Windows Firewall)" in the "Windows Security Center" is set to be enabled. If this function is set to be enabled, damage from viruses and other attacks is reduced, but some programs and functions cannot be operated.
Page 163 Problems with Operation during Use Windows Firewall functions. For details, refer to the manual accompanying the firewall software to be installed. When "Automatic Updates" is enabled, will all updates be downloaded (or installed)? Only Windows Update programs with a high level of priority will be automatically down- loaded (or installed).
Page 164 Problems with Operation during Use • If the message "This site might require the following ActiveX control..." is displayed: Click the message, and click "Install ActiveX Control." Check "Name" and "Publisher" on the [Security Warning] screen, and execute the installation. •...
Page 165 Note that this may not improve the speed of all operations. Cannot scroll with the Touch Pad utility Click [start] - [All Programs] - [Panasonic] - [Touch Pad utility] to start up the Touch Pad utility. Click [start] - [All Programs] - [Panasonic] - [Touch Pad utility settings] - [General settings], and check that the checkmark is added for [Use Touch Pad function].
Page 166 118) If [Touch Pad utility settings] does not appear when you click [start] - [All Programs] - [Panasonic], click [start] - [Control Panel] - [Add or Remove Programs], and check that [Touch Pad Utility] appears. • If it does not appear: It is necessary to install the Touch Pad utility.
Page 167 Problems with Operation during Use permitted direction. (For example, in a screen permitting only horizontal scrolling, a vertical scroll operation results in horizontal scrolling.) Some applications may not work properly When switching to a different user with the Fast User Switching function, the following problems may occur: •...
Page 168 Problems with Operation during Use ® Cannot play movies with the Windows Media Player When you try to play a movie, is [Codec required] displayed? Some video files use a Codec that is not installed as a standard. In these instances, if you play back the video file after connecting to the Internet, the Codec may be downloaded automatically, allowing you to play back the file.
Page 169: Problems With Battery
Problems with Battery The battery pack indicator lights red The battery level is very low (the charge is approx. 9% or less). Connect the AC adaptor. You can use the computer when the battery indicator light is orange. If you do not have an AC adaptor, save your data and power off your computer. After replacing the battery pack with a fully charged one, turn your computer on again.
Page 170: Problems With Cursor
Problems with Cursor The cursor cannot be controlled properly Make sure [Touch Pad] is set to [Enable] on the [Main] menu of the Setup Utility. ( page 142) With the following procedure, check that no external mouse driver is installed. If it is installed, it may not possible to use the touch pad.
Page 171 Problems with Cursor Cannot scroll Check the item "Cannot scroll with the Touch Pad utility" ( page 165).
Page 172: Problems With Display
Problems with Display Screen is too dark or becomes darker Press the Fn+F2 key. This makes the screen lighter. If the screen becomes darker after disconnecting the AC adaptor: The computer has different set brightness levels for when the AC adaptor is connected and for when it is not connected.
Page 173 Problems with Display If you want to switch the display destination repeatedly by pressing the Fn+F3 key, make sure that the display destination has switched completely each time before pressing the Fn+F3 key again. The screen may become darker. Press the Fn+F2 key to make the screen brighter. There is an afterimage Display a different screen.
Page 174 Problems with Display The LCD brightness changes a number of times when the AC adaptor is disconnected Intel(R) Display Power Saving Technology ( page 42) is active and automatically changes the LCD brightness. Image colors are not reproduced as expected when displaying photographs or other images We recommend removing the checkmark from [Intel(R) Display Power Saving Technology].
Page 175 Problems with Display • When the screen is displayed to a simultaneous display: [Intel(R) Dual Display Clone] • When Extended Desktop mode is set: [Extended Desktop] ( page 115) When [Command Prompt] is set to "Full Screen" by pressing the Alt + Enter key, the screen is displayed on one of the displays only.
Page 176: Problems With Notification Area
Problems with Notification Area The message "Your computer might be at risk" is displayed This message is displayed by the "Security Center" function in Windows XP. The "Security Center" is a function that monitors the level of safety in Windows security settings in order to operate the computer safely, for example, with regard to antivirus measures.
Page 177 Problems with Notification Area You can continue using the computer even if these messages continue to be displayed, but we recommend that "Automatic Updates" is set as [Automatic] to maintain its latest condition. Read the message. Click on the notification area. The [Automatic Updates] screen will be displayed.
Page 178: Problems With Input
Problems with Input Pressing a letter key produces a number The computer may be in ten-key mode. lights up, press the NumLk key, to disable the ten-key mode, and If NumLk indicator then input. Only capital letters are being input The computer may be in Caps Lock mode.
Page 179: Problems With Disk And Drive
Your hard disk content may be corrupted. Contact your technical support office. Cannot read from or write to a floppy disk Are you using the Panasonic CF-VFDU03 USB floppy disk drive (optional)? Has the floppy disk drive been correctly connected?
Page 180 Problems with Disk and Drive • [USB CDD] is the first device shown in [Boot priority order] in the [Boot] menu. ( page 147) Bootable CDs created using B's Recorder in the CF-W2 and CF-Y2 series cannot be used on this computer. If you want to share bootable CDs with those series, create a new boot- able CD.
Page 181 Problems with Disk and Drive When inserting a disk, follow the procedure below. Make sure the disk is inserted securely. Slide the drive power/open switch, and open the disk cover. Slide the disk into the drive under the keyboard with the label side up. Press firmly on the center of the disk until you hear it click into place.
Page 182 Problems with Disk and Drive • If the B's CLiP icon appears on the notification area, the drive cannot be turned off. In this case, right-click the icon, and click [Eject] to eject the disk. To turn off immediately, after ejecting, click the drive power icon on the notification area, and turn off with [Manual Switching].
Page 183: Problems With Sound
Problems with Sound The sound is not heard Try changing the mute by pressing the Fn+F4 key or the Fn+F6 key. With the following procedure, check that the Windows sound function is operating. (If it is not operating, pressing the Fn+F5 key or the Fn+F6 key displays the pop-up window shown on the left, but there is no sound.) Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
Page 184: Problems With Peripherals
Problems with Peripherals Your peripheral does not work Check that the drivers are installed for the connected devices. Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager]. Check whether is shown for the devices. is shown: Try removing and inserting the device once more.
Page 185 Problems with Peripherals The device will not operate properly if a different mouse driver is installed When you install a different mouse driver, such as IntelliPoint for Microsoft's IntelliMouse, the mouse driver currently installed in the computer may need to be uninstalled. For information on how to uninstall the driver, refer to "When Using an External Mouse."...
Page 186 Input [c:\util\cpupower\setup.exe] in [start] - [Run], and then click [OK]. Follow the on-screen instructions. Click [start] - [All Programs] - [Panasonic] - [CPU Idle Setting]. Click [Performance], click [OK] and then click [Yes]. The computer will be restarted automatically.
Page 187 Problems with Peripherals Idle Setting], and return [Power schemes] in [Power Options] to [Portable/ Laptop]. As a result of the LAN communications speed being extremely low, or a wireless LAN connection being lost, if the CPU power-saving setting is set, then when the LAN or whatever is not used, it is recommended to return to the above settings.
Page 188: Problems With General Network
Problems with General Network Unable to connect to a network Check that the network you are using ([Modem], [LAN] or [Wireless LAN]) is set to [Enable] in the [Advanced] menu of the Setup Utility ( page 144). Restart the computer. When using the computer as a network computer, some additional settings may have to be made depending on the usage conditions.
Page 189 Problems with General Network Cannot check the computer’s MAC address Check the computer’s MAC address using the following procedure: Check that the LAN or wireless LAN is not disabled in the Setup Utility or the Device Manager. Click [start] - [All Programs] - [Accessories] - [Command Prompt]. Input [ipconfig /all], and press the Enter key.
Page 190 Problems with Wireless LAN (only for models with wireless LAN) Access point is not detected Check that the access point is powered on. Shorten the distance between the computer and the access point, and try the detection again. It may take some time before the access point is displayed in [Available Networks]. Wait for a moment.
Page 191 Problems with Wireless LAN (only for models with wireless LAN) Cannot communicate with the access point Confirm that the following settings match with the access point. If these settings do not match, confirm the access point settings, and do the settings on the computer again. •...
Page 192 Problems with Wireless LAN (only for models with wireless LAN) • IEEE802.11g or IEEE802.11b may be affected by a microwave oven or similar, reducing the communications speed while the microwave oven is in operation. • IEEE802.11a is more susceptible to interference than IEEE802.11g or IEEE802.11b, and therefore the communications speed may be reduced if there is a wall between the computer and the access point or if the computer is further away.
Page 193 Problems with Wireless LAN (only for models with wireless LAN) icon is not displayed (or has disappeared) To display the icon, perform the following procedure. Click [start] - [Control Panel] - [Network and Internet Connections] - [Network Connections]. Right-click [Wireless Network Connection], and click [Properties]. Add a checkmark for [Show icon in notification area when connected], and then click [OK].
Page 194: Check The Computer's Usage Status
Windows with the administrator authority, some information will be displayed as [Not Found].) Running PC Information Viewer Click [start] - [All Programs] - [Panasonic] - [PC Information Viewer] - [PC Information Viewer]. Click the items to display detailed information for each item.
Page 195 You can also save a copy of the screen to a file using the following procedure: Click [start] - [All Programs] - [Panasonic] - [PC Information Viewer] - [Screen Copy]. At the time of purchase, the computer is set so that a copy of the screen can be saved to a file by pressing the Ctrl+Alt+F8 key.
Page 196: Information For Installed Applications
Information for Installed Applications If application software supplied with this computer does not function correctly, carefully read the problem-solving section of this Reference Manual and the help information for the application software. If you can connect to the Internet, refer to "Frequently Asked Questions" and other support information available on the relevant homepage for the manufacturer of the application software.
Page 197 Information for Installed Applications Other pre-installed software Contact the Panasonic technical support office as listed in the "LIMITED WARRANTY." Confirm the contact information for the Panasonic technical support office using the following procedure: Click [start], right-click [My Computer], and click [Properties].
Page 198: Protecting Your Computer From Viruses
Protecting Your Computer from Viruses A computer virus propagates through infections from one computer to another. Some viruses are highly malicious, destroying computer data, or preventing the computer from starting up properly. To Protect Your Computer from being Infected by a Virus The first time you start up Windows, the message [Your computer might be at risk] will be displayed from the Security Center icon on the notification area.
Page 199 Protecting Your Computer from Viruses NOTE We recommend that you back up your data regularly. Even if your computer is infected with a virus, it is possible to reinstall the system and recover your data from the backup. Using Antivirus Software Especially in the following cases, we recommend you perform a virus check.
Page 200 Protecting Your Computer from Viruses For further details on the Windows Firewall, see the help displayed by the following methods: Click [start] - [Help and Support] and input [Windows Firewall] into [Search]. Click [Windows Firewall overview]. If a Virus Is Discovered In order to prevent secondary infection, disconnect from the network, and conduct a check of the hard disk and other data.
Page 201: To Update This Computer To Its Latest Version
To Update this Computer to its Latest Version To Update Windows to its Latest Version In an Internet-connected environment, execute the Windows Update, and use the latest Windows service pack or patch program to update Windows on your computer to its latest version.
Page 202: Windows-Related Information
Windows-related Information When Using the Files on the Retail Version of the Windows CD-ROM The Windows files included in the Retail Version of the Windows CD-ROM for each OS are contained in the following folders: c:\windows\docs, c:\windows\dotnetfx, c:\windows\i386, c:\windows\support\tools, c:\windows\valueadd Windows Security Windows has security functions aside from the security functions in the Setup Utility.
Page 203: To View The System Configuration (Dmi Viewer)
CPU and memory. Running DMI Viewer iClick [DMI Viewer] from [start] - [All Programs] - [Panasonic]. The screen shown at left is displayed. When you click an item, detailed information on that item will be displayed.
Page 204 • WinDVD™ is a trademark of InterVideo, Inc. • PhoenixBIOS is a common law trademark of Phoenix Technologies Ltd. • Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. • Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies.

Panasonic CF-W4 Series Reference Manual

Quick Links

Related Manuals for Panasonic CF-W4 Series

Summary of Contents for Panasonic CF-W4 Series

Table of Contents