Panasonic CF-W4 Series Reference Manual page 148

Setup Utility
Exit Menu
Save Values & Exit
Exit Without Saving Changes
NOTE
When starting up from the internal DVD-ROM & CD-R/RW drive confirm the following
settings.
• [CD/DVD Drive Power] is [On] in the [Main] menu.
[Legacy USB Support] is [Enable] in the [Advanced] menu.
The drive will not start if the above settings are [Off] or [Disable].
When starting up from a device connected to a USB port
• Check to make sure that [Legacy USB Support] is [Enable] in the [Advanced] menu.
The [Boot] menu cannot be changed when the Setup Utility is started up with the User
Password.
If more than one of the same device is connected, only one device name will be
displayed.
Boot Menu
The device for starting up the operating system can also be selected during computer
start-up. After the computer is turned on and the Esc key is pressed at [Panasonic]
boot screen, [Boot Menu] (the device selection screen) will appear. When the [Boot
Menu] setting is changed, the selection screen display will also change. [Boot Menu]
is displayed only when [Boot First Menu] in the [Security] menu is set to [Enable].
The computer cannot be booted from devices listed in [Excluded from boot order]. For
this reason, the order of priority cannot be changed in this list.
Bootable CDs created using B's Recorder in the CF-W2 and CF-Y2 series cannot be
used on this computer. If you want to share bootable CDs with those series, create a
new bootable CD. (
This computer does not support startup operations from CD/DVD drives other than
the internal DVD-ROM & CD-R/RW drive.
page 89)
Exit the Setup Utility and save your changes to
CMOS.
Exit the Setup Utility without saving your changes to
CMOS.
148