Problems With Passwords And Messages - Panasonic CF-W4 Series Reference Manual

Problems with Passwords and Messages

Even after entering the password, [Type your password] is
displayed again
[Enter Password] is displayed
When resuming from the standby or hibernation mode, [Enter
Password] does not appear
The computer may be in ten-key mode.
lights up, press the NumLk key, to disable the ten-key mode, and then input.
If
The computer may be in Caps Lock mode.
lights up, press the Caps Lock key, to disable the Caps Lock mode, and then
If
input.
Input your Supervisor Password or User Password. If you have forgotten it, contact your
technical support office.
Even when a password has been set in the [Security] menu of the Setup Utility, and
[Password on boot] is set to [Enable], [Enter Password] does not appear when the
computer resumes from the standby or hibernation mode.
Set the Windows password with the following procedure, and make input of the Windows
password required.
Click the account to change in [start] - [Control Panel] - [User Accounts] and
A
set the password.
Add the checkmark for [Prompt for password when computer resumes from
B
standby] in [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced].
160