Panasonic CF-W4 Series Reference Manual page 89

Writing to CDs (B's Recorder/B's CLiP)
How to Access the Online Manual
Using B's Recorder to create a CD for booting the system
B's CLiP
Cannot read from or write to CD-R disk using B's CLiP. Only CD-RW is available.
Do not use the Fast User Switching function.
If this function is used, the
tion area after the switching is complete, and B's CLiP cannot be used. If this happens,
log off all users, and then log on to Windows with the user you want to use.
Do not add the checkmark for [Enable CD recording on this drive] in [Properties] -
[Recording] of the DVD-ROM & CD-R/RW drive. Media cannot be written.
Do not remove the media immediately after reading or writing, even after the Windows
copying message has disappeared.
When the icon is displayed on the notification area, the computer cannot enter
standby or hibernation mode. Remove the disk before entering standby or hibernation
mode.
B's Recorder
Click [start] - [All Programs] - [B.H.A] - [B's Recorder GOLD8 BASIC] - [DOC] - [User
Manual].
TaskGate
Click [start] - [All Programs] - [B.H.A] - [B's Recorder GOLD8 BASIC] - [DOC] - [TaskGate].
B's CLiP
Click [start] - [All Programs] - [B.H.A] - [B's CLiP] - [User's Manual].
You can use B's Recorder to create a CD that will allow you to boot the system from the
DVD-ROM & CD-R/RW drive.
Create the CD using the following procedure.
For further details, refer to the Online Manual for B's Recorder.
1
Run B's Recorder.
icon or the icon will no longer be shown on the notifica-
89