Panasonic CF-W4 Series Reference Manual page 110

SD Memory Card Security Function
If the function fails to operate correctly
3
Click [OK].
Operation differs depending on the setting.
If you add the checkmark for [Use the SD card when starting the computer]:
Step of [Use when starting the computer] in Step
C
If you remove the checkmark for [Use the SD card when starting the computer]:
Enter the password and click [OK].
A
At the confirmation message [The SD card information registered in the Setup
B
Utility will be erased...], click [Yes].
If you add the checkmark for [Use when logging on to Windows]:
Step of [Use when logging on to Windows] in Step
C
If you remove the checkmark from [Use when logging on to Windows]:
Enter the password and click [OK].
A
At the confirmation message [The user name and password registered in the
B
SD card will be erased...], click [Yes].
4
Restart the computer.
The computer does not respond properly when you insert the SD memory card.
Remove the card and wait a few seconds, then reinsert it. Or, enter the password.
The SD memory card indicator
Enter the password through the keyboard without removing the SD memory card.
A software application, etc. may be accessing the SD memory card. If [Set and eject] is
selected, you can remove the SD memory card while the indicator blinking.
When the setting method is set to [Set and eject]:
After the SD memory card is set, a beep confirms that the card has been recognized, then
the SD memory card indicator
Remove the card after confirming that the indicator is blinking at regular intervals.
The password input screen or Windows log on screen appear on some occasions but not
on others when [Leave set] was selected as the setting method.
• If an SD memory card is already inserted when starting the computer, the password
input screen or the Windows log on screen does not appear when the computer is
started.
is blinking.
will blink at regular intervals.
110
6
( page 104)
6
( page 105)