Installation Tips; Tools - Rekluse RADIUSX Installation Manual

· This kit includes extra EXP springs, which can be used to tune for
your desired engagement. See the EXP tuning options section in
this document for specific tuning information.

INSTALLATION TIPS

· Read the separate included Safety
Information document before operating the
vehicle with the product installed.
· Read this entire document before
performing any steps.
· If you install this product for a customer or another person, instruct
them to read the Safety Information document and the Installation
and User Guide before operating the bike with the product.
· Videos related to this product can be viewed online at
www.rekluse.com/support/videos.
· Protect eyes and skin – wear safety glasses and work gloves. Work
in a well ventilated area.
· Use the torque values listed in the instructions. Otherwise, use the
torque specifications found in your OE service manual.
· Visit www.rekluse.com/support for a full parts fiche illustration and
part numbers.
· For optimal clutch performance Rekluse recommends using fresh,
clean oil that meets JASO-MA oil rating requirements. Rekluse
offers Factory Formulated Oil™ developed specifically for Rekluse
products. Rekluse Factory Formulated Oil is a perfect complement
to any OEM or aftermarket wet clutch. Visit www.rekluse.com to
learn more.

TOOLS

· Hex key set –
(Standard SAE)
· T27 Torx bit, and possibly
other Torx sizes
· 10 mm socket
· Torque wrench (in-lbs & ft-lbs,
or N-m)
· Open-ended wrenches
(Standard SAE)
· 2x dental pick tools
Doc ID: 191-6203A
Doc Rev: 100219
Pg. 3