Rekluse RADIUSX Installation Manual page 11

5.Add a Rekluse friction disk followed by a steel drive plate.
Continue to alternate friction disks and drive plates for the
entire clutch pack. Remember to align the notches on the
friction disks when installing the clutch pack.
Friction disks
6. Install the EXP disk on top of the last steel drive plate. Align
the notches on the EXP disk with the notches on the friction
disks.
Friction disk
EXP disk
Note: If your bike's idle RPM has changed from stock – meaning
that it idles either higher or lower than the stock setting – see the
EXP Tuning Options section to determine the best EXP spring
setting before installing the EXP disk.
Steel drive plates
Doc ID: 191-6203A
Doc Rev: 100219
Total clutch pack:
9 frictions disk and
9 steel drive plates
Pg. 11