Do you have a question about the IS200 and is the answer not in the manual?
Questions and answers
Alberto
March 24, 2025
Como codificar la maquina isi200 para que ponga lista para recibir
2 comments:
Mr. Anderson
March 24, 2025
To set up the GRAVOGRAPH IS200 machine to be ready to receive:
1. Turn on the Machine: Switch the IS200 TX machine on (switch in position 1). 2. Boot Process: A message will appear on the screen: "Boot Program X.X RAM: 2M". 3. Initial Display: The LCD screen will then show "<< GRAVOGRAPH >> VERSION XX.XX" for about 3 seconds. 4. Language Selection: During this time, press "LANGUAGE: ENGLISH" to change the language if needed. - If the language selection screen does not appear, turn the machine off, wait a few seconds, turn it back on, and restart the configuration process. 5. Confirm Language: Press the button multiple times to select the desired language. The chosen language will be displayed. 6. Validate Selection: Press the confirmation button to finalize the language setting.
After completing these steps, the IS200 TX machine is set up and ready to receive further commands.
Need help?
Do you have a question about the IS200 and is the answer not in the manual?
Questions and answers
Como codificar la maquina isi200 para que ponga lista para recibir
To set up the GRAVOGRAPH IS200 machine to be ready to receive:
1. Turn on the Machine: Switch the IS200 TX machine on (switch in position 1).
2. Boot Process: A message will appear on the screen: "Boot Program X.X RAM: 2M".
3. Initial Display: The LCD screen will then show "<< GRAVOGRAPH >> VERSION XX.XX" for about 3 seconds.
4. Language Selection: During this time, press "LANGUAGE: ENGLISH" to change the language if needed.
- If the language selection screen does not appear, turn the machine off, wait a few seconds, turn it back on, and restart the configuration process.
5. Confirm Language: Press the button multiple times to select the desired language. The chosen language will be displayed.
6. Validate Selection: Press the confirmation button to finalize the language setting.
After completing these steps, the IS200 TX machine is set up and ready to receive further commands.
This answer is automatically generated
@Alberto ulldemolins