Hyundai Matrix 2003 Owner's Manual page 63

B710A01Y-GAT
Heating and Cooling Control (If Installed)
1
1. Side Ventilator
2. Center Ventilator
3. Windshield Defrost Ventilator
FEATURES OF YOUR HYUNDAI
2 3
1
B250A01FC B250A01FC
B710A01S-AAT
VENTILATION
To operate the ventilation system:
o Set the air intake control to "Fresh" mode
( ).
o To direct all intake air to the dashboard
vents, set the air flow control to "Face".
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
B710B01A-AAT
Center Ventilator
The center ventilators are located in the middle
of the dashboard.
To change the direction of the air flow, turn the
control knob on the middle of the ventilator as
desired.
B710C01Y-AAT
Side Ventilator
The side vent knobs control the amount of
outside air entering the vehicle through the side
vents. These vents can also be closed, so no air
enters through the side vents. To change the
direction of the air flow, turn the control knobs
as desired.
1- 55