Hyundai Matrix 2003 Owner's Manual page 30

Table of Contents

Advertisement

E230H04A-GYT
Child Seat Restaint Suitability for Seat
Position
Use child safety seats that have been officially
approved and are appropriate for your chil-
dren.
Seating Position
Age Group
Front
Rear
Rear
Passenger
Outboard
Center
0 : Up to 10 kg
X
U
X
(0 ~ 9 months)
0+ : Up to 13 kg
X
U
X
(0 ~ 2 years)
I : 9kg to 18kg
(9 months ~
X
U, L1
UF
4 years)
II & III : 15kg to 36kg
X
UF
UF
(4 ~ 12 years)
U : Adecuada para sistemas de sujeción de
categoría "universal" aprobados para
uso
con este grupo.
UF: Adecuada para sistemas de sujeción de
categoría "universal" encarados adelante
aprobados para uso con este grupo.
L1 : Adecuado para "Römer ISOFIX GR1" y
aprobado para su uso en este grupo
(No. de aprobación: E1 R44-03301133)
X : Posición de asiento no adecuada para
niños de este grupo.
1- 22
FEATURES OF YOUR HYUNDAI
B180B01A-GAT
Pre-tensioner Seat Belt (If Installed)
Your Hyundai vehicle is equipped with driver's
and front passenger's pre-tensioner seat belts.
The purpose of the pre-tensioner is to make
sure that the seat belts fit tightly against the
occupant's body in certain frontal collisions.
The pre-tensioner seat belts can be activated
with the airbags.
B180B01S
The pre-tensioner seat belt operates in a simi-
lar same way as an Emergency Locking Re-
tractor (ELR) type of seat belt. When the ve-
hicle stops suddenly, or if the occupant tries to
lean forward too quickly, the seat belt retractor
will lock into position. However, in certain fron-
tal collisions, the pre-tensioner will activate and
pull the seat belt into tighter contact against the
occupant's body.
Driver's airbag
1
Passenger's
airbag
3
2
B180B02S
The seat belt pre-tensioner system consists
mainly of the following components.
Their locations are shown in the illustration.
1. SRS airbag warning light
2. Seat belt pre-tensioner assembly
3. SRS control module
WARNING:
To obtain maximum benefit from a pre-
tensioner seat belt:
1. The seat belt must be worn correctly.
2. The seat belt must be adjusted to the
correct position.

Advertisement

Table of Contents
loading

Table of Contents