Hyundai Matrix 2003 Owner's Manual page 262

4. Reinstall the wheel cap by fitting the boss of
the wheel cap in the groove of the wheel,
hitting the centre of the wheel cap with hand.
D060B01FC-EAT
1. Obtain Spare Tyre and Tool
D060B01FC
Remove the spare wheel and take out the
jack and tool bag from the luggage room.
NOTE:
The jack is equipped on the underside of
the luggage mat in the vehicle.
IN CASE OF EMERGENCY
SD070D1-E
2. Block the Wheel
Flat tyre
HFC4005
Block the wheel that is diagonally opposite
from the flat tyre to prevent the vehicle from
rolling when the car is raised on the jack.
SD070E1-E
3. Loosen Wheel Nuts
D060D01FC-D
The wheel nuts should be loosened slightly
before raising the car. To loosen the nuts, turn
the wheel brace counterclockwise. Ensure
that the wheel brace socket is seated properly
on the nut and that it cannot slip. Do not
remove the nuts at this stage.
SD070F1-F
4. Put the Jack in Place
HFC4006
The base of the jack should be placed on firm,
level ground. The jack should be positioned
as shown in the drawing.
3-5