Hyundai Matrix 2003 Owner's Manual page 238

B740B01FC-GAT
Air Conditioning Operation
Cooling
B740B01FC
To use the air conditioning to cool the interior:
o Turn on the fan control switch.
o Turn on the air conditioning switch by
pushing in on the switch. The air condition-
ing indicator light should come on at the
same time.
o Set the air intake control to "Fresh" mode
( ).
o Set the temperature control to "Cool".
("Cool" provides maximum cooling. The
temperature may be moderated by moving
the control toward "Warm".)
o Adjust the fan control to the desired speed.
For greater cooling, turn the fan control to
one of the higher speeds or temporarily
select the "Recirculation" position on the
air intake control.
CONTROLS AND EQUIPMENT
B740C01FC-GAT
Dehumidified Heating
B740C01FC
For dehumidified heating:
o Turn on the fan control switch.
o Turn on the air conditioning switch. The air
conditioning indicator light should come on
at the same time.
o Set the air intake control to "Fresh" mode
( ).
o Set the air flow control to the desired
position.
o Adjust the fan control to the desired speed.
o For more rapid action, set the fan at one of
the higher speeds.
o Adjust the temperature control to provide
the desired amount of warmth.
B740D01A-AAT
Operation Tips
o If the interior of the car is hot when you first
get in, open the windows for a few minutes
to expel the hot air.
o When you are using the air conditioning
system, keep all windows closed to keep
hot air out.
o When moving slowly, as in heavy traffic,
shift to a lower gear. This increases engine
speed, which in turn increases the speed
of the air conditioning compressor.
o On steep grades, turn the air conditioning
off to avoid the possibility of the engine
over-heating.
o During winter months or in periods when
the air conditioning is not used regularly,
run the air conditioning once every month
for a few minutes. This will help circulate
the lubricants and keep your system in
peak operating condition.
1- 57