Download Print this page

Miscellaneous Information - Xilinx ML605 Manual

Modifying xilinx ml605 for direct jtag access

Hide thumbs Also See for ML605:

Photo of the "JTAG to Xilinx ML605" adaptor. The red circle marks the extra pin for the last device TDO.

Miscellaneous Information

This section gives some additional information on miscellaneous topics.

•

The schematics of the EVB Xilinx ML605 are available from

http://www.xilinx.com/support/documentation/boards_and_kits/xtp052_ml605_schematics.pdf

•

The jumper J24 on ML605 cannot be used for JTAG debugging because its JTAG lines are not

connected to the SysACE and FPGA. According to a comment in the board schematics it is only

intended for reprogramming a CPLD during production testing.

Modifying Xilinx ML605 for Direct JTAG Access 8

Table of Contents