Headers And Connectors - Supermicro SuperServer 5019A-FN5T User Manual

HDD Power Connector
JPH1 is a 4-pin power connector for HDD use. It provides power from the motherboard to
the onboard HDD.

4.2 Headers and Connectors

Fan Headers
The A2SDV-16C-TLN5F has six 4-pin fan headers (FAN1 ~ FAN4, FANA, FANB). These
headers are backwards-compatible with the traditional 3-pin fans. However, fan speed control
is available for 4-pin fans only by Thermal Management via the IPMI 2.0 interface. Refer to
the table below for pin definitions.
Speaker Header
JD1 is the speaker header. Connect the cable of the external speaker to pins 1-4.
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened. Refer to
the table below for pin definitions.
Chapter 4: Motherboard Connections
4-pin HDD Power
Pin Definitions
Pin# Definition
1 12V
2-3 GND
4 5V
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 2.5A/+12V (Red)
3 Tachometer
4 PWM_Control
Speaker Connector
Pin Definitions
Pin Setting Definition
Pins 1-4 Speaker
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
41