Table of Contents
Advertisement
SuperServer 5019A-FN5T User's Manual
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case. Refer the table below for pin definitions.
Overheat (OH)/Fan Fail
Connect an LED cable to pins 7 and 8 of the Front Control Panel to use the Overheat/Fan
Fail LED connections. The LED on pin 8 provides warnings of overheat or fan failure. Refer
to the tables below for pin definitions.
OH/Fan Fail Indicator
Status
State
Off
On
Flashing
LAN2/LAN3 Activity LED
The LAN LED connection for LAN port 2 is located on pins 11 and 12 of JF1, and the LED
connection for LAN port 3 is on pins 9 and 10. Attach the NIC LED cables here to display
network activity. Refer to the table below for pin definitions.
Reset Button
Pin Definitions (JF1)
Pin# Definition
3
Reset
4
Ground
Definition
Normal
Overheat
Fan Fail
LAN1/LAN2 LED
Pin Definitions (JF1)
Pin# Definition
9
2.5V Stby
10
LAN3 Activity LED
11
2.5V Stby
12
LAN2 Activity LED
OH/Fan Fail LED
Pin Definitions (JF1)
Pin# Definition
7
Blue LED
8
OH/Fan Fail LED
46
Advertisement
Table of Contents
