Conditions; Explanation Of Symbols - BRAMIDAN B3 Operating Instructions Manual

2 Conditions

It is important to read through the operating instructions before the work begins. Pay particular
attention to the safety instructions, which are intended to protect the operator. The operating
instructions are well illustrated, so you can quickly become familiar with the baler.
No special training is required. The company that uses the baler, (Hereafter called "the
company"), shall ensure that the operator has read and understood the operating instructions
CAUTION
and can operate the baler safely.
The quality of the baler is constantly controlled during production, and the machine will not be
supplied to a consumer until a final inspection has been carried out. If, contrary to expectation,
the product should be in any way faulty or missing any part, we request that you contact the
dealer so that the problem can be resolved immediately.
The terms of the warranty will not apply to wear and tear on wear parts in the baler, or if the parts
are deemed to have been subject to negligence or incorrect use.
The contents must not be photocopied, reproduced or translated, either wholly or in part, without
the agreement of the manufacturer.
The manufacturer declines all responsibility with regard to compensation for injury as a result of
a person disregarding the safety regulations in these instructions.

Explanation of symbols

DANGER indicates an imminently hazardous situation, which if not avoided, will result in death or
DANGER
serious injury. This signal word is limited to the most extreme situations.
WARNING indicates a potentially hazardous situation, which if not avoided, could result in death
WARNING
or serious injury.
CAUTION indicates a potentially hazardous situation, which if not avoieded, may result in minor
CAUTION
to moderate injury. It may also be used to alert against unsafe practices.
"A HAND" indicates topics to which the reader must pay special attention.
Baler 2 Betingelser USA.fm • Page 2