Eu Conformity Declaration - BRAMIDAN B3 Operating Instructions Manual

Bramidan A/S
Manufacturer:
Industrivej 69
DK-6740 Bramming
Telephone: +45 75 17 32 66
Fax: +45 75 17 31 77
Internet: www.bramidan.com
Hereby declares that:
Machine: B3 and B4
Model B3
Type PBC
Model
Type
Was manufactured in conformity with:
•
ANSI Z245.51-2008 Balling Equipment - Safety Requirements.
•
The provisions of the EU Machinery Directive 2006/42/EC with later amendments, with special reference
to Annex II, part A and Annex I of the Directive, on essential safety and health requirements in relation to
the construction and manufacture of machines.
•
The provisions of the EU EMC Directive 2014/30/EC as later amended.
•
Following standards:
EN 16500 Vertical bale presses, safety requirements
EN 61000-6-2 EMC
EN 61000-6-3 EMC
EN 60204-1 Electrical equipment on machines.
Note:
Bramidan baler are designed to be set up as stand-alone machines, and must not be connected with other
machinery without a new risk assessment and CE marking.
The CE declaration includes all add-on products from Bramidan
The baler must not be used for compressing wet or oily material, foam rubber, or other strong expansive
materials. The baler must not be used for explosive or easily ignited waste.
I confirm the above information:
Baler B3 and B4
B4
PBD
01.09.2018
Date
EC Declaration of Conformity R205-F
Technical manager
Ejnar C. Christensen
EF Declaration F USA.fm • Page 1