Transport using a crane:
When using a crane, the lifting gear must be hooked through the two holes uppermost in the
WARNING
baler's top. Do not use the eye on the top of the steering rod or the oval holes on the baler's top
frame for gripping!
In models where this is not available, place a round sling around the baler's top sidepieces. Take
care that the round sling does not deform the brackets on the vertical door.
Moving an installed baler:
All parts must be removed, and the chamber must be empty of material and other loose items.
The platen must be brought all the way down to the bottom position, so the center of gravity is
moved as far down as possible. This is done by pressing on the green start button for a minimum
of 3 seconds.
Baler
5 Transport USA.fm • Page 10