Table of Contents
Advertisement
INSTALLATION
Before installation, measure and cut a hole measuring 52cm x 72cm in your kitchen
cabinet of appropriate size to fit the hood.
The depth of the cabinet must be no less
than 260mm and 50mm of space must
be left at the two ends of the opening.
Fix the hood body into the cabinet with the 12 screws
provided. Ensure the hood is secure and stable.
Reconnect the lamp and switch wire and secure the
panel onto the hood using the two screws. Finally,
install the filter.
Remove the filter by pulling
the latch and then remove the
2 screws from the left and
right panel. Disconnect the
lamp and switch connectors
and remove the panel. Keep
the screws safe for
reinstallation.
7
Advertisement
Table of Contents
