Mounting In A High Vibration Environment - Sierra Wireless AirLink LX40 Hardware User's Manual

AirLink LX40 Series Hardware User Guide
Step a: Attach
antenna end
Raised edge

Mounting in a High Vibration Environment

Note: If you are mounting the LX40 in a high vibration area, Sierra Wireless strongly recommends
using two nylon cable ties to secure the LX40 on the bracket.
1. Thread the ties beneath the bracket.
2. Wrap the ties around the LX40, using the notches in the LX40 casing (see
3. Tighten and secure the ties around the LX40 and trim off the excess length of the ties.
Rev. 2 January 2021
Figure 2-5: Attaching the LX40 to the bracket
to align the ties.
Notches for cable ties
16
Step b: Snap other
end into place.
Press the tab to
disengage the clasps
if removing the LX40.
Figure 2-5)
41112510